Horizon UserManualV6.pdf - 第216页
5.34 User Manual Software Version 6 DIAGNOSTICS AUTOFLEX TOOLING
Change Pin Status Selecting this diagnostic function enables different pin patterns to be exercised.
On selection the following window opens:
The menu bar changes to the following:
Lower Raise Set
Status
Left Right Up Down Exit
Left, Right, Up and Down keys move the cursor to enable individual pins to be
selected.
Lower or Raise keys enable the selected pin to be raised or lowered.
Set Status key enables the AutoFlex to set the selected pin pattern. The message
Setting Up AutoFlex Tooling is displayed in the message window.
Exit returns operation to the AutoFlex diagnostics page.
Cycle AutoFlex
Tooling
Selecting this diagnostic function cycles the AutoFlex pins in a set pattern. The
pattern is as follows:
1. All the pins are raised.
2. The pins are lowered leaving a third raised, every third pin.
3. All the pins are raised.
4. The pins are lowered leaving a second third raised.
5. All the pins are raised.
6. The pins are lowered leaving the last third raised.
7. The process repeats until the Stop key is pressed.
Software Version 6 User Manual 5.33
DIAGNOSTICS
AUTOFLEX TOOLING
Autof
l
ex Matr
i
x
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
5.34 User Manual Software Version 6
DIAGNOSTICS
AUTOFLEX TOOLING
CHAPTER 6
MONITOR