Horizon UserManualV6.pdf - 第212页

Table at Home This diagnostic function continuously displays the status of the home interlock sensor. On is displayed when the rising table is in the home position. Cycle Count This diagnostic function displays the amoun…

Raise Table to Print

Height

Selecting this diagnostic function first checks that the camera carriage is at

home, if not at home the message ‘Table Movement Inhibited, Camera Not

Home’ is displayed. If the camera is at home, the rising table drives up to the

height set by the print height parameter.

Restore Default

Heights

Selecting this diagnostic function restores the vision height to the default of 50

mm and the print height to the default of 127 mm.

Set Reference

Vision Height

Selecting this diagnostic function enables the rising table vision height to be set

so that the camera views the board fiducials in focus. This is achieved by driving

the table up or down while viewing the vision monitor until the fiducial is in

focus. Pressing Calibrate Vision Height changes the menu Bar showing the

option Confirm. Pressing Confirm sets the current height of the rising table,

updating the printer configuration file. Refer to the Technical Reference

Manual, Camera and Vision System Chapter for the camera reference position

procedure.

Set Reference Print

Height

Selecting this diagnostic function enables the print height to be set so that no gap

exists between the screen and board. Refer to the Technical Reference Manual,

Rising Table Chapter for the print height calibration procedure.

Drive Table Using

Jog Buttons

Selecting this diagnostic function enables the right jog button to drive the rising

table up at slow speed and the left jog button to drive the table down, stopping

immediately the button is released.

Toggle Table Brake Selecting this diagnostic function alternately switches the table brake on and off,

while continuously displaying the current status.

Toggle Vacuum

Tooling Valve

Selecting this diagnostic function alternately switches the vacuum tooling

solenoid on and off, to supply and remove pneumatic pressure to the venturi

vacuum pump, continuously displaying the current status.

Cycle Rising Table Selecting this diagnostic function first checks that the camera carriage is at

home, if not the message ‘Table Movement Inhibited, Camera Not Home’ is

displayed. If the camera is at home, a continuous cycle starts driving the rising

table to print height, dwelling for 2 seconds, driving the table down to its datum

height, dwelling for 2 seconds and repeating the cycle until stop is pressed or the

set cycle count has been reached.

Rail Lifted Left This diagnostic function continuously displays the status of the rail lifted left

sensor. Off is displayed when the rail has been lifted.

Rail Lifted Right This diagnostic function continuously displays the status of the rail lifted right

sensor. Off is displayed when the rail has been lifted.

Software Version 6 User Manual 5.29

DIAGNOSTICS

RISING TABLE

Table at Home This diagnostic function continuously displays the status of the home interlock

sensor. On is displayed when the rising table is in the home position.

Cycle Count This diagnostic function displays the amount of cycles done and the amount of

cycles to go to complete the cycle count.

5.30 User Manual Software Version 6

DIAGNOSTICS

RISING TABLE

MULTI INTERFACE UNIT

Selecting this diagnostics module opens the following window:

The menu bar changes to the following:

Toggle Next Previous Exit

Next / Previous keys move the highlight bar up and down the list of selectable

diagnostic functions.

Toggle activates the diagnostic function, as selected by the highlight bar.

Exit returns operation to the module diagnostics page.

NOTE

This diagnostic can only be run when the machine is connected to an upline and

downline machine.

Toggle Available A This diagnostic function is currently not used.

Toggle Upline A Selecting this diagnostic function sends a request to the upline machine to send a

board.

Toggle Downline A Selecting this diagnostic function sends a request to the downline machine to

receive a board.

Machine Available AThis diagnostic function is currently not used.

Downline Ready A This diagnostic function continuously displays whether the downline machine is

ready to receive a board.

Upline Ready A This diagnostic function continuously displays whether the upline machine is

ready to send a board.

Software Version 6 User Manual 5.31

DIAGNOSTICS

MULTI INTERFACE UNIT

MIU D

agnost

CLEAR

SET

CLEAR

OFF

Machine Available A

Downline Ready A

Upline Ready A

Toggle

Available A

Upline A

Downline A