Horizon UserManualV6.pdf - 第346页

4. Remove the vacuum grid (1) from the mounting tray (3). Remove the filter cassette (2) from the mounting tray (3). NOTE Numbers in brackets refer to figure below. 5. Dispose of the used filter cassette in accordance wi…

1. Carefully lift the cleaning cassette (1) clear of the two pip pins (2) and slide

out from beneath the solvent bar (3).

NOTE

Numbers in brackets refer to figure below.

2. Dispose of the used cleaning cassette in accordance with local authority

guidelines.

3. If the filter cassette is to be replaced continue with Step 4. If the filter

cassette is not being replaced go to Step 7.

NOTE

The filter cassettes are available in varying sizes, ensure the correct size is

replaced.

Software Version 6 User Manual 9.45

CONSUMABLE REPLENISHMENTS

VORTEX UNDERSCREEN CLEANER

4. Remove the vacuum grid (1) from the mounting tray (3). Remove the filter

cassette (2) from the mounting tray (3).

NOTE

Numbers in brackets refer to figure below.

5. Dispose of the used filter cassette in accordance with local authority

guidelines.

6. Fit the new filter cassette (2) into the mounting tray (3). Fit the vacuum grid

(1) into the mounting tray (3).

9.46 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

VORTEX UNDERSCREEN CLEANER

7. Fit the edge of the new cleaning cassette (1) beneath the solvent bar (3) and

snap into place on the two pip pins (2).

NOTE

Numbers in brackets refer to figure below.

8. Press Prime Solvent (F6) key.

Screen

Clamps

Board

Clamps

Prime

Solvent

Exit

The message ‘Press the two button control buttons to prime solvent.’ is

displayed.

9. Prime the solvent using the two button control.

Software Version 6 User Manual 9.47

CONSUMABLE REPLENISHMENTS

VORTEX UNDERSCREEN CLEANER