00198243-01_AI_BulkFeederX_XS-SX_DE+EN.pdf - 第106页
3 Retrofit kit for SX-Series 3.4 Inserting the cable into the machine 106 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 ► Run the cable through the bottom…
3 Retrofit kit for SX-Series
3.4 Inserting the cable into the machine
Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 105
► Run the cable (1) through the rear opening in the
pneumatic unit and towards the front.
3 Retrofit kit for SX-Series
3.4 Inserting the cable into the machine
106 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017
► Run the cable through the bottom recess in the
pneumatic unit.
► Fasten the door of the pneumatic unit (1) again
and relock it.
► Fit the conveyor controller covers again.
3 Retrofit kit for SX-Series
3.4 Inserting the cable into the machine
Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 107
3.4.2 Cable for connecting the BulkFeeder X computer to the station computer
To connect the BulkFeeder X computer to the station computer, you need to run a LAN cable in the
machine at the infrastructure box. To do so, proceed as follows:
► Run the LAN cable (1) from the station computer,
downwards to the BulkFeeder X computer.