00198243-01_AI_BulkFeederX_XS-SX_DE+EN.pdf - 第78页
78 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 Table of contents 4.3 Fitting the BulkFeeder X computer .. 115 4.3.1 Dismantling the lower side cover .…
77Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017
Table of contents
Table of contents
1 Introduction.. 79
1.1 Safety Instructions.. 79
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 79
1.1.2 Safety Instructions for Working with Strong Magnetic Fields.. 80
1.1.3 Safety Instructions for the Power Supply (Without SMPS).. 80
1.1.4 Safety Instructions for the Power Supply (With SMPS).. 81
1.1.5 Safety instructions for the compressed air supply.. 83
1.1.6 Safety Instructions for the Gantry.. 83
1.2 Preparatory Work..... 84
1.3 Other Instructions.. 86
1.3.1 Environmentally-Friendly Disposal of Materials and Components.. 86
1.3.2 Use of Original SIPLACE Accessories and Spare Parts.. 87
1.3.3 ESD Guidelines.. 87
1.3.3.1 Definition of ESD.. 87
1.3.3.2 Important Measures to Protect Against Static Charging.. 87
1.3.3.3 Handling ESD Modules.. 87
1.3.3.4 Measurements and Modifications to ESD Modules.. 87
1.3.3.5 Dispatching ESD Modules.. 88
1.3.4 Release History.. 88
1.4 Staff Qualifications and Training.. 88
2 Brief description.. 89
2.1 Restrictions.. 89
2.2 Tools and equipment required.. 89
2.3 Scope of delivery.. 90
2.3.1 Retrofit kit for SX-Series.. 90
2.3.2 Retrofit kit for X-Series S.. 91
2.4 Required Working Time.. 92
3 Retrofit kit for SX-Series.. 93
3.1 Preparatory steps on the SX-Series.. 93
3.2 Preparatory steps.. 93
3.2.1 Installation of a GigE card in the BulkFeeder X computer.. 93
3.2.2 Fitting the LAN card in the station computer.. 97
3.2.2.1 Removing the station computer.. 97
3.2.2.2 Fitting the LAN card.. 98
3.2.2.3 Fitting the station computer.. 99
3.3 Fitting the BulkFeeder X computer.. 100
3.4 Inserting the cable into the machine.. 102
3.4.1 Cable for connecting the BulkFeeder X to the BulkFeeder X computer.. 102
3.4.2 Cable for connecting the BulkFeeder X computer to the station computer.. 107
3.5 Connecting the cable.. 108
4 Retrofit kit for X-Series S.. 111
4.1 Preparatory steps on the X-Series S.. 111
4.2 Preparatory steps.. 111
4.2.1 Installation of a GigE card in the BulkFeeder X computer.. 111
78 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017
Table of contents
4.3 Fitting the BulkFeeder X computer.. 115
4.3.1 Dismantling the lower side cover.. 115
4.3.2 Fitting the Bulkfeeder X computer.. 115
4.4 Inserting the cable into the machine.. 120
4.4.1 Location 1.. 120
4.4.2 Location 2 and 3.. 121
4.5 Connecting the BulkFeeder X computer to the station computer.. 124
4.5.1 Removing the station computer.. 124
4.5.2 Inserting the cable for the power supply and LAN connection to the BulkFeeder X computer.. 124
4.5.3 Connecting the cable to the BulkFeeder X computer.. 126
4.5.4 Fitting the station computer.. 126
4.5.5 Connecting the cable to the station computer.. 127
4.6 Connecting the cable.. 128
5 Final work.. 129
5.1 Connecting the keyboard and monitor.. 129
5.2 Configuring the BulkFeeder computer.. 130
5.2.1 Configuration for SX-Series.. 130
5.2.2 Configuration for X-Series S.. 132
5.2.3 Configuring the additional LAN card.. 135
5.3 Installing the station software.. 136
5.4 Checking the connection to the station computer.. 140
5.5 Final work to the SX-Series.. 143
5.6 Final work to the X-Series S.. 143
5.6.1 Fitting the side cover.. 143
6 Appendix.. 145
6.1 Schematic diagram electronics.. 145
6.2 Mechanics assembly.. 146
1 Introduction
1.1 Safety Instructions
Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 79
1 Introduction
In order to operate a SIPLACE® SX-Series or X-Series S with a SIPLACE BulkFeeder X®, the
machine requires additional hardware and software.
A BulkFeeder X can be fitted and operated at each location on the SX-Series or X-Series S ma-
chines.
This manual describes the steps required to convert an SX-Series or X-Series S machine.
1.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the Use of Safety Instructions and Symbols
Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► These symbols indicate actions that have to be performed by the operator.