00198243-01_AI_BulkFeederX_XS-SX_DE+EN.pdf - 第118页

4 Retrofit kit for X-Series S 4.3 Fitting the BulkFeeder X computer 118 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 ► The BulkFeeder X computer is first…

4 Retrofit kit for X-Series S

4.3 Fitting the BulkFeeder X computer

Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 117

► Remove the top screw (1).

► Position the holder. Tighten the top screw. The

holder for fitting the BulkFeeder X computer is

now fitted.

► To fit the BulkFeeder X computer, fasten the

screws (1) and washers (2) at the 2 top and 2

bottom openings of the holder.

When fitting the BulkFeeder X computer, make

sure that the washers are directly behind the

screws.

4 Retrofit kit for X-Series S

4.3 Fitting the BulkFeeder X computer

118 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017

► The BulkFeeder X computer is first fitted at the

bottom via the book holder, to the holder. Posi-

tion the book holder opening over the bottom

fastening screws.

4 Retrofit kit for X-Series S

4.3 Fitting the BulkFeeder X computer

Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 119

► Lift the openings for the top book holder over the

fastening screws.

► Tighten the top and bottom fastening screws (1).

The BulkFeeder X computer is now fitted in

place.