N7201A616E00_0317.pdf - 第112页

NPM-W 2 EJM7DE-MB-02O-0 0 First layer Second layer Third layer Fourth layer 2-2-2 -11 Engineer mode 4 Compo- nent names Menu configur a tion 6 Operating procedure 2-2-2 Production data menu Teach Checks the PCB re cognit…

100%1 / 714
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-10
Library
Displays the library data of installable feeders.
Displays the library data of available nozzles.
Placement nozzle
Feeder
Data check
Checks production data
Checks transcription conditions.
(Displayed when the transcription unit is mounted)
(option)
Nozzle stock
Displays information on the nozzles retained by the
nozzle changer.
Soft switch
Checks the setting status of the soft
switch used to set up operating
conditions.
Checks the setting status of the
machine’s communication switch.
Nozzle selection
(dispensing head)
Checks the nozzle and adhesive set in the head.
Checks and modifies the control conditions when adhesive
is dispensed.
Dispensing
Checks and modifies the dispensing data.
Dummy
dispensing
(dispensing
head)
Checks and modifies the dummy
dispensing data.
Checks and modifies the dummy
dispensing recognition data.
Displays the library data of applicable adhesive (material for
dispensing).
Adhesive
Displays the library data of available nozzles.
Dispensing nozzle
Preparation
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-11
Engineer mode 4
Compo-
nent
names
Menu configuration 6
Operating procedure
2-2-2
Production
data menu
Teach
Checks the PCB recognition
process and fixes PCB recognition
coordinates.
PCB
Feeder
Placement
Pattern attribute
Tray
Dispensing
Checks dispensing conditions for
PCB and conditions for adjusting
dispensing position misalignment.
Checks dispensing conditions
regarding dummy dispensing
(including adhesive recognition)
action and modifies the data.
Checks an image with lighting changed for
confirmation of the light condition which is
suitable for inspection.
Inspection
By changing the light value, checks
the conditions best for inspection
with watching on the screen.
Checks the component recognition
process and modifies component data.
Moves to a component pickup
position and sets the pickup offset.
Moves to a component pickup position
and sets the tray pickup position.
Checks PCB placement state and then
the conditions to correct PCB
displacement.
Checks the bad mark recognition
process and modifies the bad mark
coordinates.
Selects a target for conditional
placement on a placement point basis.
Checks the machine judgment mark
recognition process.
Checks the component recognition
process and modifies component data.
Checks the PCB warpage process and
modifies the measurement point data.
Dummy dispensing
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-12
Preparation
Head
Conveyor
Dispensing head
(Dispensing head)
Input addresses are displayed in the
unit of bits.
Output addresses are displayed in the
unit of bits.
Returns all axes to the origin.
Checks the current positions and
status of all the axes controlled by the
machine.
Checks the temperature control unit
(temperature) and Electro pneumatic
regulator (pressure).
Replaces the nozzle.
Checks the machine for normality
with the aid of head motions.
Checks the valve status and actuate
each valve on a stand-alone basis.
Adjusts the conveyor width to the
desired one.
Transfers PCBs.
Changes the lane to adjust.
(Displays only for dual lane)
Whole
Adjustment
Machine
menu
Edits measurement coordinates due
to a local height measurement
action and checks PCB conditions.
Local height