N7201A616E00_0317.pdf - 第544页

NPM-W 2 EJM7DE-MB-07 O-00 7-1-1 -5 No. Item name Function when [ON] is selecte d 1 Nozzle 2D code recog Detects wrong nozzle setting and checks for proper orientat ion of nozzle on the noz zle changer by rec ognizing the…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
7-1-1-4
No. Item name Function when [ON] is selected
25
Supply position fix
when recovery
Picks up parts from the feeder at the supply position determined by
optimization when performing recovery mounting after a parts empty or
pickup error.
26
Head camera barcode
recognition
The leading machine in the line receives the information of the bad mark
scanned by the third-part inspection machine, and transmits the information
to the subsequent machines. The leading machine also scans the PCB
barcode by the head camera and sends the information together with the bad
mark information to the host computer.
Setting information 3
● Default ：OFF
■Whole
System
administration
NPM-W2 EJM7DE-MB-07O-00
7-1-1-5
No. Item name Function when [ON] is selected
1
Nozzle 2D code
recog
Detects wrong nozzle setting and checks for proper orientation of nozzle on
the nozzle changer by recognizing the 2D code on the nozzle at the start of
automatic operation.
2
Can't use the Nzl
without 2D Code
Causes the machine to stop if nozzles without 2D code are mixed up.
3
2D code recognition
only when nozzle
exchange
Causestheheadcameratoskip2Dcoderecognitionofallnozzlessetinthenozzle
changerwhenrestartingthemachinethathasbeenstoppedduringproduction.
4
Temperature warning
check
Compares the current temperature of adhesive with the preset value on the
temperature control unit.
5
Inside changer auto
arrange
Rearranges the nozzles on the nozzle changer according to the data after
recognizing the nozzle 2D code.
6
Bad mark recognition
judge value is
variable
Uses the criterion value in the bad mark information to judge the bad mark
recognition for production boards.
7
Bad nozzle auto
change
If a certain nozzle is determined to be bad due to “Bad nozzle error rate”, this
option replaces the nozzle concerned with a normal one automatically. (12-
/16-nozzle heads)
8
Continue to product
when stuff detect
Allows production to be continued even after an error has occurred due to
detection of stuffed nozzle or filter.
9
Big nozzle manual
change (front side)
Enables the nozzles to be set manually without replacing them automatically.
10
Big nozzle manual
c
h
ange (rear side)
Enables the nozzles to be set manually without replacing them automatically.
No. Item name Function when [ON] is selected
1 Bad XY axis(front) Disables the front XY axis.
2 Bad XY axis(rear) Disables the front XY axis.
3
Time-lapse change
calibration during
producing of one
piece
Performs time-lapse change calibration during production of one PCB.
Setting information 4
● Default ：OFF
■ XY-axis
● Default ：OFF
■ Head
Unit
setting
Option setting 3
Operating procedure
7-1-1
NPM-W2 EJM7DE-MB-07O-00
7-1-1-6
No. Item name Function when [ON] is selected
1 Force PCB Eject
Ejects PCB forcibly even if there is no PCB request signal from the
downstream machine.
2
Pre process other
company M/C joint
Makes the timing of PCB request signal OFF from the downstream machine
earlier.
3
Pre process other
company M/C joint2
Hastens the timing of PCB request signal OFF from the downstream
machine.
4
All pattern bad board
pass
When all patterns are judged to be bad by bad mark recognition, this option
unloads the board to the downstream side without mounting parts on it.
5 F Proc. Eject Wait
When a third-party machine or conveyor is connected on the upstream side,
and “B. A. (Board Available) signal from it is received, PCB request signal is
sent to the upstream machine or conveyor, and a PCB is loaded.
6
Production item
name check
When this option is ON, the NPM machine checks the product name before a
PCB is loaded from the upstream machine. If the production data names do
not agree, the NPM comes to a single error stop.
7
Width adjustment
fixed
Disables width adjustment at any operation screen even during automatic
operation.
8
PCB connection
detect
Determines an error if two PCBs connected with onto each other are loaded.
9
PCB Y clamp
(option)
Keeps the Y clamp engaged also during mounting.
10
Conveyor width
check before
production
Checks that the conveyor width matches the setting in the production data
before starting production.
11
Positioning action
when overrun
Allows positioning to be performed again if a loaded PCB has overrun.
12
Multiple lot prevent
carrying (option)
Controls the board transfer during dual lane production so that the
subsequent lot will not overtake the lot ahead.
Setting information 5
● Default ：OFF
■ Conveyor
System
administration