N7201A616E00_0317.pdf - 第191页
NPM-W 2 EJM7DE-MB-02O-0 0 2-5-8 -10 Preparatio n 3 ■ In the absence of a support pin whose status is displayed as Unclear on the screen Rearrange the support pins ■ In the presence of a support pin whose status is displa…
NPM-W2 EJM7DE-MB-02O-00
Operating procedure
2-5-8
Individu-
al
prepara-
tion
Installing support pins
(for automatic change) 5
2-5-8-9
Checking the setting position of support pins
1
1
+
Inadvertently moving a support pin(s) by hand while in the process of removing a PCB, a support pin(s) being
misaligned due to the impact of the machine, etc., or decreasing/increasing a support pin(s) in the production
process may cause the support pins that are arranged in the production data to differ in number from those
actually being present in the machine.
Check the setting position of support pins once a week.
(Confirms the status of support pins
displayed on the screen)
Continue on production.
■When the pin status displayed on the
screen dose not reflect the actual state
of the support pins set in the machine
■When it completes successfully,
2
2
NPM-W2 EJM7DE-MB-02O-00
2-5-8-10
Preparation
3
■In the absence of a support pin
whose status is displayed as Unclear
on the screen
Rearrange the support pins
■In the presence of a support pin
whose status is displayed as Unclear
on the screen
Return all the support pins to the home
position by hand, and start again from
the beginning of “Checking the number of
support pins.” （→P2-5-8
-7）
+
(Only the pins in the wrong position will
be rearranged)
3
NPM-W2 EJM7DE-MB-02O-00
Operating procedure
2-5-8
Individu-
al
prepara-
tion
Installing support pins
(for automatic change) 6
2-5-8-11
PCB size and the number of pins that can be retracted
The machine determines the number of pins to be retracted according to the size of the PCB used, and the pins not
used in production can be automatically retracted within the limits of the number specified by the following table.
When setting support pins to the home position, make sure to set the correct number of the support pins based on
the number of the pins that are arranged in the production data and also the number of the ones that can be
retracted.
(The more the number of the pins that can be retracted, the longer the time to change pins)
■Single conveyor
●S size PCB 2
nd
position Placement: when turned to ON
●S size PCB 2
nd
position Placement : when turned to OFF