N7201A616E00_0317.pdf - 第512页

NPM-W 2 EJM7DE-MB-06O-0 0 6-2-12 -3 Produc- tion data teaching Placement point r ecognition teac h 2 Operating procedure 6-2-12 + 4 Set a PCB on the PCB entrance 5 (The PCB is loaded to the placeme nt stage, and after PC…

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
6-2-12-2
Setting
change
Measures placement position of a component on the PCB and teaches offset which is the difference of the
original position.
●Turn On soft switch [Detect Component Fiducial]of the created data with the NPM-DGS.
1
3
2
Choose the teaching
component
●Perform on both and .
1
32
NPM-W2 EJM7DE-MB-06O-00
6-2-12-3
Produc-
tion data
teaching
Placement point
recognition teach 2
Operating procedure
6-2-12
+
4
Set a PCB on the PCB
entrance
5
(The PCB is loaded to the placement
stage, and after PCB is recognized,
the head camera moves to the
recognition mark position)
6
7
+
(Recognition starts and the result is
displayed)
(The data is held)
5
6
7
NPM-W2 EJM7DE-MB-06O-00
6-2-12-4
Setting
change
8
9
+
■Multi-points recognition
(Moves to the next placement point
recognition mark position)
Repeat steps from to as
many times as there are
recognition points, and then
To
■1 point recognition
10
Confirm the message
10
6
8
(The data is held)
10
8