N7201A616E00_0317.pdf - 第575页
NPM-W 2 EJM7DE-MB-07 O-00 7-1-5 -2 6 3 4 5 4 4 3 Confirm the message (T i me starts) Enter the numerical value, ● Repeat the steps and and enter year/month/date/time. Change the numerical number on the screen ● Touching …
NPM-W2 EJM7DE-MB-07O-00
Unit
setting
Monitor setting
7-1-5-1
Monitor setting
You can configure the settings related to the monitor.
A
B
C
2
2
1
screen saver
Enter the time (seconds) to shut off the
backlight.
It does not light off when ‘0’ is set.
Time
Enter the current time.
Language
Choose the display language from
among Japanese, English and Chinese.
Fourth language is optional.
Choose the waiting time to shut off
(The time is registered)
■When you do not choose the time
Change the numerical number
on the screen
●Touching the screen displays the
input window.
●If the machine is connected to LNB,
the time is adjusted to LNB side,
therefore, you cannot set the time on
the screen.
Operating procedure
7-1-5
■When changing the waiting time to
shut off the screen saver
A B
C5
1
3
NPM-W2 EJM7DE-MB-07O-00
7-1-5-2
6
3
4
5
4
4
3
Confirm the message
(Ti
me starts)
Enter the
numerical value,
●Repeat the steps and
and enter year/month/date/time.
Change the numerical number
on the screen
●Touching the screen displays the
input window.
6
■When you do not enter
■To change the language
■To enable
■When you do not set time
■To disable
System
administration
NPM-W2 EJM7DE-MB-07O-00
Choose with
Choose the defect status
of the head using
Only when [Action Bad] is chosen,
confirm the message
Unit
setting
Bad head setting
7-1-6-1
You can configure the bad head settings.
Operating procedure
7-1-6
Choose nozzle head position
For a placement head
3
4
1
2
(Operation ends)
■When all heads are to [Normal]
4
1 2 3
■When you do not optimize DGS
●”Pickup Bad” appears when the rate of
pickup or recognition errors exceeds
20%.
It is reset after changeover.
●”Action Bad,” which cannot be reset
even after changeover, is not used in
production.