N7201A616E00_0317.pdf - 第202页
NPM-W 2 EJM7DE-MB-03O -00 Produc- tion Pr oduction star t 2 Operating procedure 3-1-1 Move the Y -axis Move the X-a xis of which the fe eder cart is de tached until its en d comes on th e retract pos ition seal of the Y-…
NPM-W EJM2DE-MB-03O-05
When errors are found by self-diagnosis
1
2
1
Choose the item
(The modification method is displayed)
2
Modify error as instructed
3-1-1-2
For independent mode
1
(The independent mode is displayed)
2
Select a lane
2
To start production in front and
rear lanes:
To start production only in lane 1:
To start production only in lane 2:
1
Production
NPM-W2 EJM7DE-MB-03O-00
Produc-
tion
Production start 2
Operating procedure
3-1-1
Move the Y-axis
Move the X-axis of which the feeder cart is detached until its end comes on the retract position
seal of the Y-axis
3-1-1-3
Retract position seal
X-axis end
2
1
OFF
SERVO
4
SERVO
ON
5
3
6
To
How to start production using an axis on the opposite side when the feeder cart is detached
■The machine without the independent changeover support unit (movable cover) (option)
Even though the feeder cart is detached in independent mode, production using an axis on the opposite side is
enabled. The preparation is described here.
Production is also enabled with the feeder cart attached.
Start production after attaching the feeder cart
■The machine with the independent changeover support unit (movable cover) (option)
NPM-W2 EJM7DE-MB-03O-00
3-1-1-4
Production
6
6
7
When the movable cover is open
(In case )
(The movable cover is closed)
+
●For starting production, see “Starting
production” and “For independent
mode”.
Start production