N7201A616E00_0317.pdf - 第617页

NPM-W 2 EJM7DE-MB-07 O-00 7-3-5 -2 A B C B C Displays parameters regarding rotation center when the hea d is dispensed . Displays parameters regarding rotation center measure d per nozzle. Dispensing head Rotate center X…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
You can check rotation center offset (calibration result) of each nozzle head.
B
A
E
C
D
7-3-5-1
Machine
parame-
ter
Head rotation center
check
Operating procedure
7-3-5
Switches the display of [Rotate center]
to the value used in recognizing
components with the multi-recognition
camera.
Rotate center X[mm]/Y[mm]
XY coordinates of rotation center.
Switches to the value being temporarily
retained after measurement.
Standard value of rotation center that is
used in correcting temporal changes.
Amount of change in the reference
rotation center that occurs during
temporal change correction.
Placement head
A B
E DC
NPM-W2 EJM7DE-MB-07O-00
7-3-5-2
A B C
B
C
Displays parameters regarding rotation
center when the head is dispensed.
Displays parameters regarding rotation
center measured per nozzle.
Dispensing head
Rotate center X[mm]/Y[mm]
XY coordinates of rotation center.
A
System
administration
NPM-W2 EJM7DE-MB-07O-00
Nozzle position
Offset of the selected nozzle is displayed
in .
7-3-6
Machine
parame-
ter
B
Placement head
You can check the X/Y/θ element offset values (calibration result) per head θ rotation angle.
BA
A
Dispensing head
A
B
C
C
A
Operating procedure
7-3-6
Offset per head angle
X[mm]/Y[mm]/ θ[°]
Offset values of X/Y coordinates and θ.
Nozzle position
Offset of the selected nozzle is
displayed in .
Component selection
Offset check per head
angle
B
Offset per head angle
X[mm]/Y[mm]/ θ[°]
Offset values of X/Y coordinates and θ.
B
A