N7201A616E00_0317.pdf - 第546页

NPM-W 2 EJM7DE-MB-07 O-00 7-1-1 -7 No. Item name Function when [ON] is selec ted 1 Feeder maint warning Displays a w arning mess age when the sh ot count of ta pe feeder has exceeded the w arning valu e. 2 Part rema inde…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
7-1-1-6
No. Item name Function when [ON] is selected
1 Force PCB Eject
Ejects PCB forcibly even if there is no PCB request signal from the
downstream machine.
2
Pre process other
company M/C joint
Makes the timing of PCB request signal OFF from the downstream machine
earlier.
3
Pre process other
company M/C joint2
Hastens the timing of PCB request signal OFF from the downstream
machine.
4
All pattern bad board
pass
When all patterns are judged to be bad by bad mark recognition, this option
unloads the board to the downstream side without mounting parts on it.
5 F Proc. Eject Wait
When a third-party machine or conveyor is connected on the upstream side,
and “B. A. (Board Available) signal from it is received, PCB request signal is
sent to the upstream machine or conveyor, and a PCB is loaded.
6
Production item
name check
When this option is ON, the NPM machine checks the product name before a
PCB is loaded from the upstream machine. If the production data names do
not agree, the NPM comes to a single error stop.
7
Width adjustment
fixed
Disables width adjustment at any operation screen even during automatic
operation.
8
PCB connection
detect
Determines an error if two PCBs connected with onto each other are loaded.
9
PCB Y clamp
(option)
Keeps the Y clamp engaged also during mounting.
10
Conveyor width
check before
production
Checks that the conveyor width matches the setting in the production data
before starting production.
11
Positioning action
when overrun
Allows positioning to be performed again if a loaded PCB has overrun.
12
Multiple lot prevent
carrying (option)
Controls the board transfer during dual lane production so that the
subsequent lot will not overtake the lot ahead.
Setting information 5
● Default ：OFF
■ Conveyor
System
administration
NPM-W2 EJM7DE-MB-07O-00
7-1-1-7
No. Item name Function when [ON] is selected
1 Feeder maint warning
Displays a warning message when the shot count of tape feeder has
exceeded the warning value.
2
Part remainder number
warning
Displays a warning message when “Feeder remainder number warning
length” in “Action parameters” is reached.
3
Simple Remain
Manage
When the remainder of a reel used reaches 1, this option resets the
remainder, assuming that the reel has been used up.
4
Supply parts count
input when running
Allows the supply parts count for splicing to be input without stopping
production.
5 Splicing length stop
Causes the machine a single stop when the remaining reel is less than 1
200 mm (minimum length required for splicing).
6
Fdr parts collation
(option)
If tape feeders containing any parts different from those in the production
data downloaded to the machine are loaded, the interlock function of the
machine is activated, causing the machine to stop due to an error.
7
Unconditional parts
splicing
Enable parts to be re-verified when feeder parts verification is ON, even
though splicing verification has already been done.
8
Component splicing
executes when
remaining warning
happen
Enables splicing only for tape feeders with which a remainder warning has
occurred.
9 Feeder deploy free
Allows a tape feeder containing the same parts can be placed at any
desired slot before starting production or if parts empty has occurred. When
the specified feeder is used up, the arranged feeder is used automatically to
continue production.
10
Pick up sequence has
high priority when free
arrange
Gives priority to simultaneous pickup if it is involved when picking up parts
with “Feeder deploy free” ON. Notifies the operator that the cycle time may
be slower depending on the tape feeder arrangement.
Setting information 6
● Default ：OFF
■ Feeder
Unit
setting
Option setting 4
Operating procedure
7-1-1
NPM-W2 EJM7DE-MB-07O-00
7-1-1-8
No. Item name Function when [ON] is selected
11
Fdr parts collation
(Time of feeder set )
If tape feeders have been removed/set during single stop, this option
executes parts collation for the feeders concerned after production is started.
If there is no problem, production continues. If any problem is found, a
message “Hasn’t executed parts verification” appears and the machine stops.
12
Feeder outside parts
collation
Enables tape feeder collation by the customer’s parts collation system.
When replenishing parts after a parts empty error, this option inquires of the
parts collation system whether collation has done. If collated, parts
replenishment will be completed to continue production. If not collated, parts
replenishment is considered to be unfinished and production will be stopped.
13
Substituted parts auto
change
Enables pickup of substitute parts using the registered data when the master
parts are used up.
14
All arranged
components supply
target
Allows loading of tape feeders that contain any parts registered in the
arrangement list.
15
Auto Cart Height
Measure
When several feeder carts are used for one machine, pickup rate lowers due
to variation in the height of cart. To prevent this problem, this option
measures the height of reference post automatically to make correction.
16 Stop at S-tape sense
Causes the machine a single stop if the splicing tape is detected, and
displays an error message “Splicing tape detection stop”.
17
Material empty check
of trans table
(Currently unused)
Detects material empty of the transfer tables (supply tables A to D) by the
sensor mounted on the transfer unit.
18
Trans material empty
check of syringe
(front)
(Currently unused)
Detects material empty of the syringe (supply tables A to D) by the sensor
mounted on the transfer unit.
19
Trans material empty
check of syringe(rear)
(Currently unused)
Detects material empty of the syringe (supply tables A to D) by the sensor
mounted on the transfer unit.
20
Syringe trans material
empty stop
(Currently unused)
Syringe trans material empty stop
Setting information 7
● Default ：OFF
■ Feeder
System
administration