YSM10安装调整(eng).pdf - 第30页
For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 30/107 4.10 “ MultiMA CS Light ” ( ) : 1. [519 M ulti Macs Light] CalibSm…
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
29/107
4. Trace the mark.
[Trace] (
0.5mm mark on the ) .
5. Perform the mark recognition test.
Figure 32
6. [Execute] .
When the is tapped, the same mark is recognized by the two (2) cameras.
7. .
Figure 33
:
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
30/107
4.10 “MultiMACS Light” ( )
:
1. [519 Multi Macs Light] CalibSm .
Figure 34
2.
“MultiMacs1” “MultiMacs2”
3. [Execute] .
[Specified value]
Light adjuster color
Tolerance of the measured value
Bit value
Multi MACS
230 +/- 5
41000 - 63082
Table 18
Step 3
Step 2
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
31/107
4.11 :
1. [010 Scan Camera] CalibSm .
Figure 35
2. “Camera Position” “Main Camera”.
“Rec. ” “ 302 (313)” .
3.
[Move to Set Pos.] .
.
4.
[Rec.Test] .
: .
5. [Execute] .
Ｑ
Figure 36
6. .
Item
Specified value
Camera Pos. X, Y
Variation between “Current” and “Measure” values should fall within 0.01mm
Table 19
ﾓ
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/