YSM10安装调整(eng).pdf - 第7页

For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 7/107 2.5 O ther jigs required for the adjustment 󴼺󴩯󴊣󴤸󵶅󴸻󳵩󷃅󴼽󾘍 󳔁󳖜󵰩󳖏󷌄 �…

100%1 / 107
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
6/107
2.3 Station and components required for the “ACP-Station” adjustment :
If the machine is equipped with an optional Multi camera, perform the “ACP-Station” adjustment.
󳚀󳚀 ＵＵ󶦰󶦰󶦰 󶗅󶗅 󶽍󶽍 ｐｐＭＭＭ󶦰󶦰󶦰 󷌄󷌄 󾘍󾘍 󷂂󷂂󳚀󳚀󳚀 ＠＠ＨＨＨ ＵＵ ＩＩ
ＨＨ 󷮉󷮉 󵮄󵮄 ｐｐＩＩＩ ＷＷ ＠＠ＨＨＨ ＩＩ ＨＨ 󷮉󷮉 󵮄󵮄 ｐｐＩＩＩ 󶽍󶽍 ｐｐＭＭＭ
󶇚󶇚󶇚
󷌄󷌄󷌄
Table 6
2.4 Jigs and tools required for installing a machine
󶿆󶿆󶿆 󴀺󴀺󴀺
Table 7
Item
Part Name
Part No.
Qty
FAMF Station
(Plate Size: 240x170)
FAMF STATION ASSY.
KGA-M88F0-A0
１
(Select
either of
the two)
Mini FAMF Station
(Plate Size: 100x100)
FAMF STATION
S.ASSY.
KGA-M88F0-B0
68-pin 󵪼󵮄 QFP
󵪼󵮄 QFP 68P
KW8-M880A-10
1
208-pin 󵪼󵮄 QFP
(With a sticker)
󵪼󵮄 QFP 2S
KM0-M880A-20
1
Item
Part Name
Part No.
Qty
󵌵󴕴
PLAT LEVEL,
0.1mm/m
KV7-M3823-00
1 or 2
55mm spanner󴥴
SPANNER 55
KLW-M8801-00
2
Jig for aligning a
production line
JIG 1
S01F-M54B1-11
2
󳕠󳫰󳗦
󴼈󳣇
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
7/107
2.5 Other jigs required for the adjustment
󴼺󴩯󴊣󴤸󵶅󴸻󳵩󷃅󴼽󾘍󳔁󳖜󵰩󳖏󷌄󴱵
󷌄󴱵󶗔󴺝󾘍󳫰󶟾󷸁󷂂󷛜󶽍󳔁󳖜󳻻󴸭󷌄󴱵󱜃󷛚󳖜󷌄󴱵󷸁󷂂󳗦󳔌
Item
Part Name
Part No.
Qty
16-pin 󵪼󵮄 QFP
(WITH a white sticker
on the back)
󵪼󵮄 QFP 16
ASSY
KHY-M880A-00
1
(Select
either of
the two)
It is used for the “󴥬󴫐” adjustment
of the component recognition
camera.
󷌄󷌄󷌄
16-pin 󵪼󵮄 QFP
(WITHOUT a sticker)
󵪼󵮄 QFP
16P
KW8-M880A-00
It is used for the “󴥬󴫐” adjustment
of the component recognition
camera.
󷌄󷌄󷌄
Pickup position
adjustment jig
MASTER
FEEDER ASSY
KHJ-MD4A0-00
1
KHJ-MD4A0-02
“KHJ-MD4A0-02” contains the tail pin
jig and the pin gauge.
󴌿󴌿󴌿 󴀺󴀺󴀺
Type 303A/314A
󳬹󳴵
(For SOP)
󳬹󳴵
303A/314A AS.
KHY-M7740-A0
1
Type 304A/315A
󳬹󳴵
(For QFP)
󳬹󳴵
304A/315A AS.
KHY-M7750-A0
1
It is used for picking up a 35mm sq.
light adjuster.
Table 8
󴌿
󴀺
󴌿
󴀺
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
8/107
3. Installation of the machine
󴸭󶦃󴫐󷛱󳖇󴊊󶿆󴸻󳵩󴳷󵥺󴊛󳖏ｙｓｍＱＰ󵶅󶄌󴖐
:
See “SI1004008E=General procedures for carrying in and installing a machine” for the general
procedures for installing a machine.
3.1 Remove the shipping brackets
After removing the shipping brackets from the machine, fill in the Check sheet that comes with the
machine.
󷚔󷚔󷚔 󴰰󴰰󴰰
󷉧󷉧󷉧 󳭋󳭋󳭋 :
󴂃󴺝󳙡󵘕󶀻 “󳷟󳪠󵞺” 󴂃󴺝󳔎
󶽩󶃼󷵥󴥁󴸊 .
Check list for the shipping brackets
Axes
Qty
Location of the brackets
X-axis
1 position
STOPPER
KLW-M2252-01 (Qty: 1)
BOLT HEX, SOCKET HEAD
91312-04008 (M4x8, Qty: 4)
Y-axis
1 position
STOPPER
KMG-M2658-00 (Qty: 1)
BOLT HEX, SOCKET HEAD
91312-04006 (M4x8, Qty: 2)
BOLT HEX, SOCKET HEAD
91312-05010 (M5x10, Qty: 2)
SC-axis
1 position
BRKT., FIX
KLW-M78H9-00 (Qty: 1)
BOLT HEX, SOCKET HEAD
91312-03005 (M3x5, Qty: 2)
BOLT HEX, SOCKET HEAD
91312-04008 (M4x5, Qty: 2)
sATS15 (Option)
AH-axis
1 position
Yellow plastic strap
Table 9
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/