YSM10安装调整(eng).pdf - 第36页

For Ser v ice E n gineer Service Information SI1610004E -000= YSM10_Proced ures for the adjustmen ts required after installing a machine 36/107  Adjustment for the ma chine with the Multi camera (Option) 9. Select multi…

100%1 / 107
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
35/107
5. [Move to Set Pos.] 󳬹󳴵. ( 󳬹󳴵 .)
, 󷵅 Type 302 (313) 󳬹󳴵 to Head 1.
6.
[Rec.Test] .
Ｈ
:
7.
[Execute]
󳬹󳴵
Ｑ
Figure 42
8.
:
・
?
・
󳬹󳴵 ?
・
󳬹󳴵 ?
Figure 43
Item
Specified value
Head Offset X
0.18mm or less with respect to 12.00 (24.0) pitch
Head Offset Y
0.06mm or less
Table 21
Ｑ＠
,
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
36/107
Adjustment for the machine with the Multi camera (Option)
9. Select multi camera “5-Digital MultiC”.
:
ﾓMethod
Each Camera Head 1
Figure 44
10.
10-head type: Head 1 Head 10
5-head type: Head 1 Head 5
11. [Rec.Test] .
󳬹󳴵
12. [Execute]
Ｑ
Figure 45
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
For Service Engineer
Service Information
SI1610004E-000= YSM10_Procedures for the adjustments required after installing a machine
37/107
13. Check and save the measurement results.
・
・
・ 󳬹󳴵 ?
Item
Specified value
Head Offset X
0.18mm or less with respect to 12.00 (24.0) pitch
Head Offset Y
0.06mm or less
Table 22
14.
Figure 46
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/