00197042-04_SM_X-Serie-S_Customer_EN.pdf - 第336页
9 Component feeding 9.1 Cutter 336 Service Manual SIPLACE X-Serie S 06/2019 Installation ► Follow the removal instructions in reverse order for installation. Also observe the following instructions: Fig.434: Fitting the…
9 Component feeding
9.1 Cutter
Service Manual SIPLACE X-Serie S 06/2019 335
9.1.6 Replacing the protective plate
Parts
Fig.432: Protective plate
03019894‑xx Protective plate
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable ties
Overview
Fig.433: Protective plate on cutter
1. Protective plate [03019894-xx]
2. Five fastening screws
3. Clip connecting baffle plate and pro-
tective plate
CAUTION!
There is a risk of injuring yourself on
the cutting edge of the blades.
.
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.3 "Replacing the Cutter on the COT Insert [03066690-xx]" [}329]
► Remove the five screws fastening the protective plate.
► Straighten the two clips with pliers.
► Remove the protective plate from the cutter.
9 Component feeding
9.1 Cutter
336 Service Manual SIPLACE X-Serie S 06/2019
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
Fig.434: Fitting the protective plate
► Make sure that the five fastening
screws are completely countersunk.
The screws must be flush with the pro-
tective plate.
► Ensure that there is a gap between the
cutter blade and the edge of the baffle
plate inside(1).
► If everything is correct, there should be
a contact at position(2).
9.1.7 Replacing the articulated joint on the short-stroke cylinder
Parts
Fig.435: Joint
03000518-xx Articulated joint on the short-stroke cylinder
03057290-xx 2x hexagon socket fillister head screws ISO4762-M5x35-12.9, geomet. 321+VL
(screws for movable blade)
Equipment and tools
00376625‑xx Torque wrench 2.5‑25Nm
03121952-xx Lubrication grease BEM 34-132, 400 g cartridge
03123777-xx One-hand grease gun for 400 ml cartridge
00334892‑xx Loctite 243
00353832-xx Allen key set
Wire cutters
Cable ties
9 Component feeding
9.1 Cutter
Service Manual SIPLACE X-Serie S 06/2019 337
Removing the articulated joint
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.3 "Replacing the Cutter on the COT Insert [03066690-xx]" [}329]
Fig.436: Cover plate
► Remove the screws(2) fastening the
top cover plate(1) and then remove the
top cover plate.
Fig.437: Baffle plate
► Remove the two screws(1) at the front
side and five screws(2) at the inner
side fastening the baffle plate.
► Remove the baffle plate unit from the
cutter.
Fig.438: Plastic caps
From the bottom side of the cutter you have
easy access to the plastic cap.
► Remove the plastic caps(1) over the
fastening screws on both sides of the
movable blade.
► Remove the two screws.