APPENDIX.pdf - 第7页
Appendix A Optimizer A-1 Appendix A. Optimizer The Optimizer automatically creates a program to maxim ize the production efficiency by optimizing the arrangement position and operation order of tape feeder , nozzle, ANC,…
Appendix A Optimizer
A-1
Appendix A. Optimizer
The Optimizer automatically creates a program to maximize the production efficiency by
optimizing the arrangement position and operation order of tape feeder, nozzle, ANC, and
others. The method to achieve the maximum production efficiency is as follows.
Minimize the number of nozzle changes
Maximize the number of simultaneous pickups by the feeder
Arrange the feeders so that the time for XY gantry movement is minimized
Decide the order of optimum mounting operation
The Optimizer takes into account of various operation conditions and executes the
optimum algorithm to achieve these results. In this chapter, the structures of various
setting screens and setting methods necessary to execute the Optimizer are explained.
A.1. Setup Menu/ANC
Figure A-1. "Optimizer Setup: ANC" dialog box
The screen to set the optimum arrangement of movable type ANCs. Fixed type ANCs are
not listed in the screen.
<ANC> group/<Arranged> list box
Samsung Component Placer CP-45F(V)/FS Operations Manual
A-2
Displays the ANCs already arranged in the feeder lane of the "PCB Setup" dialog box.
The Optimizer does not change the arrangement position of the ANCs listed here and
arranges the tape feeder so that there is no mechanical interference with the arranged
ANCs. Move the ANC, for which you want the Optimizer to show the optimum
position, to the <Available> list box by selecting it in the list and clicking on the
arrow button (
).
<ANC> group/<Available> list box
The group to list the ANCs for which you want optimum arrangement among the
ANCs registered in the "PCB Setup" dialog box. When the Optimizer is executed, the
listed ANCs are arranged on the optimum positions on the feeder lane. Move the
ANC that is not necessary for the PCB file being edited to the <Prohibited> list box
by selecting it and clicking on the arrow button (
).
<ANC> group/<Prohibited> list box
The group to list the ANCs that are not necessary to be arranged by the Optimizer
(unnecessary for the PCB being edited). The ANCs listed in this box are not
considered for optimum arrangement by the Optimizer and they are considered as
non-existent. Therefore, the ANCs listed in this box must be removed from the feeder
lane. Move the ANC that needs to be optimally arranged to the available list box by
selecting it and clicking on the arrow button (
).
<Run Optimizer> button
When this button is pressed, executes the Optimizer. After executing this button, do
not execute other MMI commands until Optimizer execution has been completed and
the MMI screen is displayed again.