00198442-04_UM_TX-V2_EN.pdf - 第107页

Instruction manual SIPLACE TX 3 Technical data and assemblies From software version 714.0 12/2020 3.1 Performance data 107 3.1.5 PCB conveyor dat a SIPLACE TX m / TX2i m / TX2i m 4 mm 3 Dual conveyor (standard) Du al con…

100%1 / 330
3 Technical data and assemblies Instruction manual SIPLACE TX
3.1 Performance data From software version 714.0 12/2020
106
3.1.4 PCB conveyor data for SIPLACE TX1 / TX2 / TX2i
3
Dual conveyor
(standard)
Dual conveyor in
"single conveyor"
(optional) mode
Board dimensions (width
*a
x length)
Standard 45 mm x 50 mm to
260 mm x 375 mm
45 mm x 50 mm to
460 mm x 375 mm
With "long board (LBO)" option 45 mm x 50 mm to
260 mm x 550 mm
45 mm x 50 mm to
460 mm x 550 mm
Stationary conveyor side Outer /outer
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 148
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 33 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 1.3 seconds
*c
0 seconds
*d
*)a When using board widths > 375 mm, make sure that the peripheral modules can also process these board widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 1.8 seconds.
*)d 0 seconds in asynchronous mode
Instruction manual SIPLACE TX 3 Technical data and assemblies
From software version 714.0 12/2020 3.1 Performance data
107
3.1.5 PCB conveyor data SIPLACE TX m / TX2i m / TX2i m 4 mm
3
Dual conveyor (standard) Dual conveyor in
"single conveyor"
(optional) mode
Board dimensions (width
*a
x length)
Standard 45 mm x 50 mm to
260 mm x 375 mm
45 mm x 50 mm to
460 mm x 375 mm
Placement accuracy 20 µm (3σ) 45 mm x 50 mm to
260 mm x 375 mm
--
Placement accuracy 15 µm (3σ) 50 mm x 50 mm to
250 mm x 100 mm
--
Stationary conveyor side Outer /outer
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 148
PCB weight
*b
Standard Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 33 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 1.3 seconds
*c
0 seconds
*d
*)a When using board widths > 375 mm, make sure that the peripheral modules can also process these board widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c With the "Convoy Mode" option. Without this option 1.8 seconds.
*)d 0 seconds in asynchronous mode
3 Technical data and assemblies Instruction manual SIPLACE TX
3.2 Ambient conditions and connection values From software version 714.0 12/2020
108
3.1.6 Component supply
3.2 Ambient conditions and connection values
3.2.1 Ambient conditions for packaging, transportation and storage
3
3.2.2 Environmental conditions for operation
3
Component supply Tracks occupied
SIPLACE TX
With C&P20 P2
With CPP
With CPP /TH
With CPP or TwinHead and JTF-ML at location 1
38 feeder modules, each with 8mm X
40 feeder modules, each with 8 mm X
40 feeder modules, each with 8 mm X
28 feeder modules, each with 8 mm X
SIPLACE TX2 / TX2i m / TX2i m 4 mm
With C&P20 M3
With CPP M
38 feeder modules, each with 8mm X
40 feeder modules, each with 8 mm X
Technical data
Tape reel diameter to 330.2 mm (13")
Component trolley changeover time < 1 minute
Temperature range Between -25°C and 55°C
Atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization
Room temperature
SIPLACE TX
Between 15°C and 35°C
Atmospheric humidity 30% to 75%
(on average not higher than 45%, so that there is no risk of
condensation on the placement machine.)
Ambient pressure > 750 mbar (corresponds to 1700 m above mean sea level)