00198442-04_UM_TX-V2_EN.pdf - 第52页
2 Operational safety Instruction manual SIPLACE TX 2.2 Warning labels From software version 714.0 12/2020 52 2.2.3.8 Att achment points for transport ation with p allet truck o r fork -lif t 1 in fig. 2.2 - 1 , page 43 ,…
Instruction manual SIPLACE TX 2 Operational safety
From software version 714.0 12/2020 2.2 Warning labels
51
2.2.3.6 Warning strips on the inside of the output conveyor
2
A black-yellow warning strip is attached to the inside, above the output conveyors. Item 2 in the
fig. 2.2 - 3
, page 45 or fig. 2.2 - 6, page 48 (quantity per placement machine: 1)
This warns the operator about the hazard area in which it is prohibited to reach into the inside of
the adjacent placement machine.
2
2.2.3.7 NO attachment points for transportation with fork-lift
Item P 006 in fig. 2.2 - 2, page 44 and 2.2 - 3, page 45, item no. 03155631-xx or
Item P 006 in fig. 2.2 - 5
, page 47 and 2.2 - 6, page 48, item no. 03155631-xx
(Quantity per placement machine: 4)
DANGER
Risk of injury when protective cover open!
Reaching into the hazard area of the adjacent placement machine when the cover is
open could cause injuries. This area is marked with black-and-yellow warning strips.
Make sure that you do not reach into the hazard area of the adjacent placement ma-
chine when the protective cover is open.
2
2
2
Risk of hand injuries (crushing) over an extensive area
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the inside of the adjacent placement ma-
chine
2
2
2
NO attachment points for transportation with fork-lift
Transportation of the placement machine with a fork-lift is prohib-
ited at these marked points. The placement machine could tilt
over. This poses a risk of severe injury and damage to property.
The placement machine may ONLY be lifted and transported
with the fork-lift at the output side of the placement machine.
Read and observe the chapter "Setting up and commission-
ing" on page 171.
2 Operational safety Instruction manual SIPLACE TX
2.2 Warning labels From software version 714.0 12/2020
52
2.2.3.8 Attachment points for transportation with pallet truck or fork-lift
1 in fig. 2.2 - 1, page 43, item no. 03155590-01 or
1 in fig. 2.2 - 4
, page 46, item no. 03155590-01
(Quantity per placement machine: 2)
2.2.4 Meaning and description of warning labels (label for China)
The following labels for Chinese customers look different to the standard labels (rest of world).
2.2.4.1 Warning label W 209-CN
2
Item W 209-CN in fig. 2.2 - 4, page 46 and 2.2 - 5, page 47, item no. 03149080-01
(Quantity per placement machine: 2)
2
2
2
Attachment points for transportation with pallet truck or fork-lift
The placement machine may only be lifted and transported at
these marked points. The placement machine could otherwise tilt
over.
The placement machine may ONLY be lifted and transported
at these marked points (on the output end of the placement
machine). Read and observe the chapter "Setting up and
commissioning" on page 171.
2
2
2
2
2
2
Warning label on the EMERGENCY STOP button
Instruction manual SIPLACE TX 2 Operational safety
From software version 714.0 12/2020 2.2 Warning labels
53
2.2.4.2 Warning label W 204-CN
2
W 204 in fig. 2.2 - 4, page 46, 2.2 - 5, page 47 and 2.2 - 6, page 48 item no. 03149290-01
(Quantity per placement machine: 8)
2.2.4.3 Warning label W 004-CN with laser text label
2
Item W 004-CN in fig. 2.2 - 4, page 46, item no. 03155348-01
Text label "Laser" in fig. 2.2 - 4
, page 46, item no. 03155432-01 (quantity per placement machine:
1)
(Quantity per placement machine: 1)
2
2
2
Warning about hand injuries
Reaching in here can lead to injuries to the arms and hands.
Do not reach into the running placement machine.
Do not reach into the inside of the adjacent placement ma-
chine
2