00198442-04_UM_TX-V2_EN.pdf - 第140页
3 Technical data and assemblie s Instruction manual SIPLACE TX 3.6 Gantry system From software version 714.0 12/2020 140 3.6.3 Gantry structure 3 Fig. 3.6 - 3 Gantry structure - view of head mount (1) Head boa rds (2) Ga…
Instruction manual SIPLACE TX 3 Technical data and assemblies
From software version 714.0 12/2020 3.6 Gantry system
139
3.6.2 Position of gantries (SIPLACE TX1)
3
Fig. 3.6 - 2 Position of gantries in SIPLACE TX1 - location 2
(1) Gantry 1
(2) Y axis, gantry 1
(T) Direction of PCB transport
(1)
(2)
3 Technical data and assemblies Instruction manual SIPLACE TX
3.6 Gantry system From software version 714.0 12/2020
140
3.6.3 Gantry structure
3
Fig. 3.6 - 3 Gantry structure - view of head mount
(1) Head boards
(2) Gantry arm
(3) Y linear motor with fixed bearing (primary part)
(4) Mount for conversion board and trailing cable holder
(5) End position bumper (4x)
(6) Guidance system with permanent magnet (secondary part of the X linear motor)
(7) Length measurement system
(8) Head mount with X axis linear motor (primary part)
(4)
(3)
(1)
(5)
(2)
(6)
(7)
(5)
(8)
Instruction manual SIPLACE TX 3 Technical data and assemblies
From software version 714.0 12/2020 3.6 Gantry system
141
3.6.4 Y axis structure
3
Fig. 3.6 - 4 Y axis structure
The Y axis essentially consists of the following main modules:
(1) Y linear motors (primary part) on the X axis with fixed and loose bearing mounted
(2) Permanent magnet (secondary part of the X-axis linear motor)
(3) Length measurement system
(4) Guidance system
(1)
(4)
(3)
(2)
(4)