00198442-04_UM_TX-V2_EN.pdf - 第286页
6 Station extensions Instruction manual SIPLACE TX 6.1 Nozzle changer From software version 714.0 12/2020 286 6.1.4.4 Assembly The nozzle changer is fix ed to the COT insert. 6 Fig. 6.1 - 13 Asse mbly position (1) Markin…
Instruction manual SIPLACE TX 6 Station extensions
From software version 714.0 12/2020 6.1 Nozzle changer
285
6.1.4.3 Configuration example with SIPLACE TwinStar
Location 1 can accommodate a nozzle changer with eight magazines for the TwinStar (item 1 in
fig. 6.1 - 12
, page 285).
6
Fig. 6.1 - 12 Position of nozzle changer for the TwinStar - configuration example of SIPLACE TX2
6
NC CPP
Nozzle changer for the CPP with 4 magazines
COT 40 In
Component trolley in the innermost position
COT 40 Out
Component trolley in the outermost position
IC
Stationary camera
NC TH
Nozzle changer for the TwinStar
6 Station extensions Instruction manual SIPLACE TX
6.1 Nozzle changer From software version 714.0 12/2020
286
6.1.4.4 Assembly
The nozzle changer is fixed to the COT insert.
6
Fig. 6.1 - 13 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
6.1.4.5 Special nozzles
The SIPLACE placement machines process components in accordance with the standard SMT
spectrum.
ASM is continually developing special nozzles.
Special nozzles are available for all placement heads in order to process placement jobs with max-
imum speed, precision and flexibility. The use of automatic nozzle changers also reduces the
setup times that occur at a product change.
For the production of special magazines and grippers, again contact ASM.
(1)
(2)
(3)
Instruction manual SIPLACE TX 6 Station extensions
From software version 714.0 12/2020 6.1 Nozzle changer
287
6.1.5 Reject bin and nozzle station
6
Fig. 6.1 - 14 Reject bin and nozzle station (example with nozzle changer for SIPLACE SpeedStar C&P20 P2)
(1) Reject bin
(2) Nozzle station
(1)
(2)