00198442-04_UM_TX-V2_EN.pdf - 第139页
Instruction manual SIPLACE TX 3 Technical data and assemblies From software version 714.0 12/2020 3.6 G antry s ystem 139 3.6.2 Position of gantries (SIPLACE TX1) 3 Fig. 3.6 - 2 Position of gantries in SIPLACE TX1 - loca…
3 Technical data and assemblies Instruction manual SIPLACE TX
3.6 Gantry system From software version 714.0 12/2020
138
3.6 Gantry system
3.6.1 Position of gantries (SIPLACE TX2 /TX2i)
3
Fig. 3.6 - 1 Position of gantries - example of SIPLACE TX2i - location 2
(1) Gantry 1
(2) Y axis, gantry 1 and gantry 2
(3) Gantry 2
(T) Direction of PCB transport
(3)
(2)
(1)
Instruction manual SIPLACE TX 3 Technical data and assemblies
From software version 714.0 12/2020 3.6 Gantry system
139
3.6.2 Position of gantries (SIPLACE TX1)
3
Fig. 3.6 - 2 Position of gantries in SIPLACE TX1 - location 2
(1) Gantry 1
(2) Y axis, gantry 1
(T) Direction of PCB transport
(1)
(2)
3 Technical data and assemblies Instruction manual SIPLACE TX
3.6 Gantry system From software version 714.0 12/2020
140
3.6.3 Gantry structure
3
Fig. 3.6 - 3 Gantry structure - view of head mount
(1) Head boards
(2) Gantry arm
(3) Y linear motor with fixed bearing (primary part)
(4) Mount for conversion board and trailing cable holder
(5) End position bumper (4x)
(6) Guidance system with permanent magnet (secondary part of the X linear motor)
(7) Length measurement system
(8) Head mount with X axis linear motor (primary part)
(4)
(3)
(1)
(5)
(2)
(6)
(7)
(5)
(8)