00198442-04_UM_TX-V2_EN.pdf - 第270页
6 Station extensions Instruction manual SIPLACE TX 6.1 Nozzle changer From software version 714.0 12/2020 270 6.1.1 SIPLACE SpeedS tar C&P20 P2 /C&P20 M3 nozzle changer 6.1.1.1 Short nozzle changer with 4 magazin…
Instruction manual SIPLACE TX 6 Station extensions
From software version 714.0 12/2020 6.1 Nozzle changer
269
6 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE placement machines.
6.1 Nozzle changer
The nozzle changer is available in two variants for the relevant head type:
– Short nozzle changer with 4 magazines and 20 nozzle garages each for the SIPLACE TX1 /
TX2 / TX2 m
– Narrow nozzle changer with 3 magazines and 20 nozzle garages each for the
SIPLACE TX2i /TX2i m / TX2i m 4 mm
The magazines are seated on a common support. They are centered with two parallel pins and
fixed in place with 4 push buttons. The exact position is determined with two fiducials on each
magazine. The correct seat of the magazines on the basic nozzle changer body is monitored by
microswitches, to prevent a collision of the placement head with any magazines projecting up-
wards. All magazine locations must be filled since the safety circuit stops the placement machine
in response to missing magazines or magazines that are not seated correctly. At the installed noz-
zle station, components can be blown off the nozzles of the SpeedStar and nozzles stripped off
and rejected.
6 Station extensions Instruction manual SIPLACE TX
6.1 Nozzle changer From software version 714.0 12/2020
270
6.1.1 SIPLACE SpeedStar C&P20 P2 /C&P20 M3 nozzle changer
6.1.1.1 Short nozzle changer with 4 magazines
The short nozzle changer with 4 magazines is used with the SIPLACE TX1/2.
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 03101503-xx Nozzle magazine 60xx/40xx with 20 garages
6
Fig. 6.1 - 1 Short nozzle changer for the SIPLACE SpeedStar with 4 magazines
6
CAUTION
Only use this nozzle magazine together with the SpeedStar.
Instruction manual SIPLACE TX 6 Station extensions
From software version 714.0 12/2020 6.1 Nozzle changer
271
6.1.1.2 Narrow nozzle changer for C&P20 P2 P / C&P20 M3 with 3 magazines
The narrow nozzle changer with 3 magazines is used with the SIPLACE TX2i / TX2i m /
TX2i m 4 mm.
Item no. 03129201-xx Nozzle changer for TX2 i/ TX2i m
Item no. 03101503-xx Nozzle magazine 40xx/60xx with 20 garages
Item no. 03218226-xx Nozzle magazine 40xx
6
Fig. 6.1 - 2 Nozzle changer for the SIPLACE SpeedStar with 3 magazines
6
CAUTION
Only use this nozzle magazine together with the SpeedStar.