Installationsanleitung_SuSE9.3_en.pdf - 第6页

Installation Description Customized LRL SuSE 9.3 6 of 69 4 Inst allation instructions/upgrade instructions 4.1 Definitions 4.1.1 Initial installation At the start of an initial installation, there is no data on the hard …

100%1 / 69
Customized LRL SuSE 9.3 Installation Description
5 of 69
3 Requirements
Hardware:
Linux: Econel 20
Econel 30
Econel 40
Econel 50
Scenic 800 (Only to be recommended with at least 256 MB main memory)
SDRAM/100 128 MB/ECC (S26361-F1840-E15)
1)
SDRAM/100 256 MB/ECC (S26361-F1840-E16)
1)
Scenic xL (Only to be recommended with at least 256 MB main memory)
RDRAM300 128 MB (S26361-F2126-E4)
1)
RDRAM300 256 MB (S26361-F2126-E5)
1)
(1) Order number: Fujitsu-Siemens-Computer (FSC)
Operating system:
Linux: SuSE-LINUX 9.3 (LRL 503.05)
Free disk space required: 3 GB on "/"
Installation Description Customized LRL SuSE 9.3
6 of 69
4 Installation instructions/upgrade instructions
4.1 Definitions
4.1.1 Initial installation
At the start of an initial installation, there is no data on the hard disk. If there is no master data available, the
installation program installs sample master data on the hard disk along with the line computer software.
The prerequisite for the line computer software installation is a correctly installed SuSE-LINUX 9.3 operating
system.
4.1.2 Update
If the only difference between the new software version and the already installed version is the revision level
(e.g. LRU.503.01 ⇒ LRU.503.02), this is referred to as an update. When an update is performed, the master
data is retained.
4.1.3 Upgrade
If the new software differs from the already installed software by its version designation (e.g. LRU.502.02 ⇒
LRU.503.01), this is referred to as an upgrade. When an upgrade is performed, the master data is retained
and, if required, automatically converted to the new data format.
4.1.4 Migration from SCO to Linux
Before installing the LRL software, all the data which is to be reused must be backed up. The master data
can be reused after SuSE-LINUX 7.3 / SuSE Linux 9.0 / SuSE Linux 9.3 and LRL.503.01 - LRL.503.05 have
been installed. The backup tool SDH_Backup cannot be used for backing up data for Linux.
Customized LRL SuSE 9.3 Installation Description
4.1.5 Installation with central data storage
During the installation procedure, only data on the local disk is manipulated. Therefore, the following
procedure is to be observed by customers with central data storage.
• Copy central LP-/BE-/GF-/RI library from the central computer to the local line computer under UNIX.
• Perform the installation.
• Copy central LP-/BE-/GF-/RI-/ST library from local line computer to the central computer.
4.1.6 Installing the SCO LRU CD under Linux
If the SCO line computer CD is read in on a Linux computer, the installation aborts with the message "file
not found".
7 of 69