Installationsanleitung_SuSE9.3_en.pdf - 第66页
Installation Description Customized LRL SuSE 9.3 10. Establish a connection to the pr inter by entering the TCP/IP address of the printer in the ad dress field of the browser. Figure 4-44 11. The device configuration of …
Customized LRL SuSE 9.3 Installation Description
4.5.4.3 Configuration procedure
1. Firstly, you need a printout of the network configuration of the printer.
If the printer is connected to the network (and switched on), indicator lamp "1" (see the picture
below) is lit. Now you can press the network button "2" as described in the printer instructions to
print out the configuration page.
An example of such a printout is shown in Fehler! Verweisquelle konnte nicht gefunden werden.
Fehler! Verweisquelle konnte nicht gefunden werden..
Figure 4-43
2. This printout shows the TCP/IP address and the subnet mask of the printer (in the example:
"172.22.2.250" and "255.255.0.0").
3. To establish a connection from the computer to the printer, the address of the
computer has to be
changed temporarily to suit that of the printer. In the example, this is, for instance "172.22.2.240".
4. To do this, log into the line computer under GNOME as the user "plr".
5. Open a terminal window by selecting "Operating system level" from the "Options" menu.
6. Use the command
su
to get administrator permissions (and confirm with the "root" password).
7. Temporarily change the address of the computer with the command
ifconfig eth0 <address of computer> netmask <subnet mask>
In the example, this would be:
ifconfig eth0 172.22.2.240 netmask 255.255.0.0
8. The connection to the printer can be tested with the command
ping <address of the printer>
In our example, this would be
ping 172.22.2.250
9. Use the command
mozilla
to start the browser.
65 of 69
Installation Description Customized LRL SuSE 9.3
10. Establish a connection to the printer by entering the TCP/IP address of the printer in the address
field of the browser.
Figure 4-44
11. The device configuration of the printer is displayed.
Figure 4-45
12. The selection in the top left (indicated by a red circle) allows you to change the language to your
local language.
Figure 4-46
13. Confirm your selection with the "Apply" button.
14. The device selection is now shown in the selected language.
66 of 69
Customized LRL SuSE 9.3 Installation Description
15. The network settings are shown by clicking the "Network" (1) tab.
Figure 4-47
16. Set the option "IP Configuration Method" to "Manual" (2).
17. (3) Specify the details for
the printer name ("Host Name")
the TCP/IP address of the printer ("IP Address")
the subnet mask of the printer ("Subnet Mask")
the address of the default gateway.
18. Click the "Apply" button (4) to change the settings in the printer.
WARNING
If you change the address of the printer, the connection to the printer is
interrupted when you click the "Apply" button.
19. The configuration program still informs you that the settings were updated successfully.
Figure 4-48
67 of 69