Installationsanleitung_SuSE9.3_en.pdf - 第8页
Installation Description Customized LRL SuSE 9.3 8 of 69 4.2 Up date of LRL.503.03 (SuSE 7.3) / LRL.503.04 (SuSE 9.0) to LRL.503.05 (SuSE 9.3) When migrating from LRL.503.03 (SuS E 7.3) or LR L.503.04 (SuSE 9.0) to LRL.5…
Customized LRL SuSE 9.3 Installation Description
4.1.5 Installation with central data storage
During the installation procedure, only data on the local disk is manipulated. Therefore, the following
procedure is to be observed by customers with central data storage.
• Copy central LP-/BE-/GF-/RI library from the central computer to the local line computer under UNIX.
• Perform the installation.
• Copy central LP-/BE-/GF-/RI-/ST library from local line computer to the central computer.
4.1.6 Installing the SCO LRU CD under Linux
If the SCO line computer CD is read in on a Linux computer, the installation aborts with the message "file
not found".
7 of 69
Installation Description Customized LRL SuSE 9.3
8 of 69
4.2 Update of LRL.503.03 (SuSE 7.3) / LRL.503.04 (SuSE 9.0) to
LRL.503.05 (SuSE 9.3)
When migrating from LRL.503.03 (SuSE 7.3) or LRL.503.04 (SuSE 9.0) to LRL.503.05 (SuSE 9.3), we
recommend that the filesystem format is changed from "reiserFS" to "ext3", as the latter is more stable. You
can only change the file system by completely reformatting the hard disk and reinstalling the operating
system. In consequence, it is necessary to first back up the data and restore it after the operating system has
been installed.
If you choose not to change the filesystem format, it is nevertheless necessary to adjust the partition size to
meet the requirements of SuSE 9.3. This is described in the section below. If the operating system is
reinstalled, it is not necessary to increase the size of the partitions.
4.2.1 Increasing the size of the hard disk partitions
When migrating from LRL.503.03 (SuSE 7.3) and in certain circumstances when migrating from LRL.503.04
(SuSE 9.0) to LRL.503.05 (SuSE 9.3), a correction is carried out which enlarges the hard disk partitions for
the root area. The size of the hard disk is checked both when the operating system is installed and when the
Line Computer Linux application is installed.
The user must be logged in as "root" to enlarge the partition size. Furthermore, no other user can be logged
in as "plr", otherwise the partitions cannot be changed. This means that the operator must log out as "plr"
and thus terminate the line computer application.
The following two steps must be carried out:
• Execute the script "mkpart.sh" under SuSE 7.3 or SuSE 9.0 under the root account
• Install/update the full version Customized LRL-SuSE 9.3
The steps in detail are as follows:
Step 1: Run the script under SuSE 7.3/9.0 under the root account
1. Reboot the system ("shutdown").
2. Switch to console 2 with the key combination "Ctrl" + "Alt" + "F2".
3. Log in as "root"
4. Insert the "Customized SuSE 9.3" CD
5. Mount the CD with the command:
mount /cdrom
6. Start the script with the command:
/cdrom/mkpart.sh
Respond to the prompt "do you want to continue [y/n]" with "y".
7. When the following message has been displayed:
Now you have to reboot the system.
login as root and run this script again
Customized LRL SuSE 9.3 Installation Description
9 of 69
Reboot the computer with the command:
init 6
8. Select "Boot from Harddisk" during booting.
9. Repeat steps 2 through 6.
10. After the message "removing old packages" has appeared, reboot the computer with
init 6
The CD must remain in the drive to continue installation of the operating system.
Step 2: Updating to the full version of Customized LRL SuSE 9.3
11. Install SuSE 9.3 and LRL.503.04 according to the instructions in section
4.3.3, point 4.