00195760-0102_UM_D3_SR605_EN.pdf - 第118页

3 Technical data for the machine User Manual SIPLACE D3 3.6 Gantry system From software version SR.605.xx 07/2008 EN Edition 118 3.6 Gantry system 3.6.1 Position of the gantries 3 Fig. 3.6 - 1 Position of the gantries G1…

100%1 / 364
User Manual SIPLACE D3 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.5 Placement head
117
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
d
1.0 N - 15 N
2.0 N - 30 N
d
Nozzle types 5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
gripper
Nozzle spacing on the
two Pick&Place heads
70.8 mm 70.8 mm
X/Y accuracy
e
± 26 μm / 3σ, ± 35 μm / 4σ ± 22 μm / 3σ, ± 30 μm / 4σ
Angular accuracy ± 0.05° / 3 σ, ± 0.07° / 4 σ ± 0.05° / 3 σ, ± 0.07° / 4 σ
CO camera type 33 25
Illumination level 6 6
Possible illumination level
settings
256
6
256
6
a) Please note that the component range that can be placed is also affected by the pad geometry, the cus-
tomer-specific standards and the packaging tolerances.
b) If the C&P head and TwinHead are combined in a placement area, the maximum dimensions are restricted.
c) If standard nozzles are used
d) SIPLACE High-Force Head, Section 6.5
, page 314.
e) The accuracy value was measured using the vendor-neutral IPC standard.
3 Technical data for the machine User Manual SIPLACE D3
3.6 Gantry system From software version SR.605.xx 07/2008 EN Edition
118
3.6 Gantry system
3.6.1 Position of the gantries
3
Fig. 3.6 - 1 Position of the gantries
G1 Gantry 1
X1 X axis, gantry 1
Y1 Y axis, gantry 1
G3 Gantry 3
X3 X axis, gantry 3
Y3 Y axis, gantry 3
G4 Gantry 4
X4 X axis, gantry 4
Y4 Y axis, gantry 4
(T) Direction of PCB transport
Placement area 2
Placement area 1
User Manual SIPLACE D3 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.6 Gantry system
119
3.6.2 Structure of the X axis
3
Fig. 3.6 - 2 Structure of the X axis
(1) Gantry arm
(2) Head mount with X-axis linear motor (primary part)
(3) Linear distance measuring system
(4) Guide system
(5) Permanent magnet (secondary part of the X-axis linear motor)
(6) Sub-gantry camera
(7) Head boards
(8) Cable and hose carrier