00195760-0102_UM_D3_SR605_EN.pdf - 第22页

1 Introduction User Manual SIPLACE D3 1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition 22 – operation o f the placement machine without th e hand guard (dummy feed er module) if not every…

User Manual SIPLACE D3 1 Introduction

From software version SR.605.xx 07/2008 EN Edition 1.1 Description of the machine

1.1.6 EU Declaration of Conformity

The product/device described below 1

Product: Placement machine

Type: SIPLACE D3

Item no.: 00119870 1

manufactured by

SIPLACE

Electronics Assembly Systems

Rupert-Mayer-Str. 44

81379 München 1

conforms to the regulations and standards listed in the EU Declaration of Conformity provided.

1.1.7 Use as prescribed

The product must only be used for its intended purposes as described in the catalogs and techni-

cal descriptions, namely the placement of SMD components, and only with the third-party equip-

ment and components recommended or permitted by SIPLACE. Use for a different or

extended purpose is not prescribed.

If the product is not used as prescribed, SIPLACE accepts no liability for any damage that may

occur and does not guarantee that the components will work properly and without problems.

Use as prescribed also includes compliance with all the instructions in the user manual.

For the product to operate correctly and reliably, it must have been transported, stored, erected

and assembled correctly and must be operated and maintained with care.

1.1.8 Failure to use as prescribed

Failure to use the product as prescribed can result in both danger to life and limb and material

damage. For this reason, used other than as prescribed is expressly prohibited. If the product is

not used as prescribed, SIPLACE Company accepts no liability for any damage that may occur

and does not guarantee that the components will work properly and without problems.

Use of the machine other than as prescribed includes, for example

– operation of the placement machine with safety equipment deactivated or removed.

– placement of components that do not meet the permitted specification.

– use of component feeder modules that have not been approved.

– use of unauthorized accessories and additional modules.

– use of the placement machine by unqualified personnel.

1 Introduction User Manual SIPLACE D3

1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition

– operation of the placement machine without the hand guard (dummy feeder module) if not

every location is occupied with a feeder module.

– unclear allocation of electrical connecting cables to each machine and the installed options.

– if there are two or more people standing at a component trolley location at the same time dur-

ing the retrofit.

1.1.9 Noise emissions

1.1.10 Important notes on environmentally-friendly disposal of materials

and components

SIPLACE systems are manufactured using only materials and parts that can be easily separated

and disposed of in an environmentally-friendly way.

PLEASE NOTE 1

The owner of the system has sole responsibility for the proper environmentally-friendly disposal

of machines, working materials, consumables and wear parts.

→ Please observe your national statutory provisions for waste disposal and environmental pro-

tection.

1.1.11 Electromagnetic compatibility (EMC)

SIPLACE placement machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.

1.1.12 Note on original SIPLACE accessories

→ Only use SIPLACE original spare parts and authorized accessories. The use of other parts

will affect safety and will invalidate the liability for any consequential damage.

Max. noise emissions 75 dB (A)

User Manual SIPLACE D3 1 Introduction

From software version SR.605.xx 07/2008 EN Edition 1.2 Line concept

1.2 Line concept

1.2.1 Description of the recommended line concept

The SIPLACE concept is characterized by its flexibility, modularity, compactness and high power

density. It allows a production line to be individually configured from identical and different mod-

ules. If the production requirements change, the individual placement machines are so compact

that they can be recombined quickly and easily.

Fig. 1.2 - 1 Sample line concept

The SIPLACE family has exactly the right placement machine, whatever the output requirements:

SIPLACE D-series machines can be used to place IC, flip-chip, bare die and exotic components

(OSC). They cover the spectrum of components from 01005 to 85 x 85 / 125 x 10 mm² with a very

high placement rate.