00195760-0102_UM_D3_SR605_EN.pdf - 第299页
User Manual SIPLACE D3 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 299 6.1.3.4 Assembly The nozzle changer is fixed to the component tr olley docking unit. 6 Fig. 6.1 - 15 A…
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
298
6.1.3.3 Position of the nozzle changers for the TwinHead
A nozzle changer may be installed for the TwinHead at locations 1 to 4.
Nozzle changer 1 at locations 1 and 3 (item 1 in Fig. 6.1 - 14
): 12 magazines each
Nozzle changer 2 at locations 2 and 4 (item 5 in Fig. 6.1 - 14
): 10 magazines
This gives a total capacity of 4 nozzle changers with 44 magazines and a total of 88 nozzle hold-
ers.
6
Fig. 6.1 - 14 Position of the nozzle changers for the TwinHead on the machine
(1) Nozzle changer 1
(2) Standard magazine
(3) Magazine for special nozzles or grippers
(4) Component reject bin
(5) Nozzle changer 2
PLEASE NOTE 6
If there is an MTC2 installed at location 4, then the "Nozzle changer for the TwinHead in the
placement area with 2 gantries and docked MTC2" option must be set up there (see Section
6.1.3.5, from page 300).
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
299
6.1.3.4 Assembly
The nozzle changer is fixed to the component trolley docking unit.
6
Fig. 6.1 - 15 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
6
→ Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
WARNING 6
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
300
6.1.3.5 Nozzle changer for the TwinHead in the placement area with 2 gantries and
docked MTC2
Item no. 00119747-xx Nozzle changer for TwinHead upstream of MTC
The standard nozzle changer for the TwinHead cannot be used at location 4 with a combination
of TwinHead and MTC2 in placement areas with two gantries. For this situation there is an optional
nozzle changer for the TwinHead in the placement area with 2 gantries and docked MTC2.
6
Fig. 6.1 - 16 Nozzle changer for the TwinHead in the placement area with 2 gantries and docked MTC2
6.1.3.6 Nozzle changer 2 for the TwinHead
Item no. 00119717-xx Nozzle changer 2, TwinHead
This nozzle changer can hold up to 10 nozzle magazines. All the other technical data is the same
as for the 1st nozzle changer.