00195760-0102_UM_D3_SR605_EN.pdf - 第339页

User Manual SIPLACE D3 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.17 Coplanar ity laser module 339 6 Fig. 6.17 - 4 Coplanarity laser module (1) Laser sensor (2) Detec tor (3) Laser emitter …

100%1 / 364
6 Station extensions User Manual SIPLACE D3
6.17 Coplanarity laser module From software version SR.605.xx 07/2008 EN Edition
338
6.17.6 LED displays on the controller
The statuses of the coplanarity module are indicated by LEDs. The LEDs can be found at the bot-
tom of the controller (see item 6 in Fig. 6.17 - 4
, page 339).
LED state Status display
Green Test object in measuring range
Yellow Middle of measuring range
Red
Outside the measuring range,
with low reflection
LED Off Laser switched off
LED Power Status display
LED lights up Supply voltage present
LED avg avg1 avg2
Off Off No averaging
Red Off Averaging 1
Off Red Averaging 2
Red Red Averaging 3
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.17 Coplanarity laser module
339
6
Fig. 6.17 - 4 Coplanarity laser module
(1) Laser sensor
(2) Detector
(3) Laser emitter
(4) Assembly bracket
(5) Controller
(6) LED displays and connections on the controller
6 Station extensions User Manual SIPLACE D3
6.18 Vacuum pump From software version SR.605.xx 07/2008 EN Edition
340
6.18 Vacuum pump
Item no. 00119794-xx Vacuum pump, HF/X/D3, 220 V
Item no. 00119795-xx Vacuum pump, HF/X/D3, 110 V
Item no. 00119792-xx Vacuum pump operation conversion kit
Every Collect&Place head has a separate vacuum generator that supplies the holding and place-
ment circuit with the vacuum that it needs. The vacuum generator works on the Venturi principle.
The compressed air consumption of the machine is, for example, around 550 Nl/min. This means
that the compressed air supply must be sized accordingly. If the owner does not have sufficient
capacity locally, the associated investment costs would be high, so we supply a vacuum pump that
will provide the necessary vacuum.
Other advantages of using the vacuum pump are:
– It roughly halves the machine's compressed air consumption.
– It reduces the input pressure.
– The machine can be easily integrated into existing lines.
– The ongoing operating costs reduce according to the energy costs.
The vacuum pump is maintenance-free and 100% oil-free. They have sufficient capacity to supply
the holding circuits of the Collect&Place heads.
PLEASE NOTE 6
There are currently vacuum pumps only for the 12-segment and 6-segment Collect & Place
heads.
Compressed air
consumption
without
vacuum pump
Compressed air
consumption
with
vacuum pump
a
Compressed air consumption with
4 tape cutters and in relation to the
placement head configuration
C&P / C&P / TH 550 Nl/min 300 Nl/min
a) Under normal atmospheric conditions at 20°C and 1013 hPa