00195760-0102_UM_D3_SR605_EN.pdf - 第300页
6 Station extensions User Manual SIPLACE D3 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 300 6.1.3.5 Nozzle changer for the T winHead in the placement area with 2 gantries and docked MTC2 Item no…
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
299
6.1.3.4 Assembly
The nozzle changer is fixed to the component trolley docking unit.
6
Fig. 6.1 - 15 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
6
→ Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
WARNING 6
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
300
6.1.3.5 Nozzle changer for the TwinHead in the placement area with 2 gantries and
docked MTC2
Item no. 00119747-xx Nozzle changer for TwinHead upstream of MTC
The standard nozzle changer for the TwinHead cannot be used at location 4 with a combination
of TwinHead and MTC2 in placement areas with two gantries. For this situation there is an optional
nozzle changer for the TwinHead in the placement area with 2 gantries and docked MTC2.
6
Fig. 6.1 - 16 Nozzle changer for the TwinHead in the placement area with 2 gantries and docked MTC2
6.1.3.6 Nozzle changer 2 for the TwinHead
Item no. 00119717-xx Nozzle changer 2, TwinHead
This nozzle changer can hold up to 10 nozzle magazines. All the other technical data is the same
as for the 1st nozzle changer.
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
301
6.1.3.7 Component reject bin
A component reject bin may be installed for the SIPLACE TwinHead. This is positioned beside the
fine-pitch vision module (see item 4 in Fig. 6.1 - 14
, page 298).
6
Fig. 6.1 - 17 Component reject bin
6.1.3.8 Grippers and special nozzles
The SIPLACE machines can process components based on through hole technology and odd-
shaped (OSC) components, in addition to the standard SMT spectrum. SIPLACE also contin-
uously develops special nozzles and grippers in parallel.
Special nozzles are available for all placement heads in order to process placement jobs with max-
imum speed, precision and flexibility. The use of automatic nozzle changers also reduces the set-
up times that occur at a product change.
SIPLACE can provide mechanical grippers for Pick&Place heads. If a component's surface is
not suitable for sucking up with nozzles, then it can be picked up and placed with mechanical grip-
pers. There are two types of gripper, and their functions can be divided into two groups:
– Grippers that grip the component at its outer edges and
– Grippers that grip the component at its inner edge.
Information on special nozzles and grippers is available from SIPLACE. Fo
r the production of
spec
ial magazines and grippers, again contact SIPLACE.