00195760-0102_UM_D3_SR605_EN.pdf - 第314页

6 Station extensions User Manual SIPLACE D3 6.4 Sensor for the component reject bin From software version SR.605.xx 07/2008 EN Edition 314 6.4 Sensor for the component reject bin Item no. 001 16848-xx Sensor , component …

User Manual SIPLACE D3 6 Station extensions

From software version SR.605.xx 07/2008 EN Edition 6.3 Waffle-pack changer

313

6.3.7 Controls

Fig. 6.3 - 3 WPC - controls

(1) Main power switch

(2) EMERGENCY STOP button

(3) Magazine storage unit

(4) Crank for raising or lowering the chassis

6 Station extensions User Manual SIPLACE D3

6.4 Sensor for the component reject bin From software version SR.605.xx 07/2008 EN Edition

314

6.4 Sensor for the component reject bin

Item no. 00116848-xx Sensor, component reject bin, X-series/D3

The sensor for the component reject bin monitors whether the reject bin is seated correctly in its

mount.

– If the reject bin was not inserted correctly, the machine cannot be started.

– If the reject bin jumps out of its mount during the placement process, the machine is stopped

immediately to avoid a head crash.

Each reject bin can be monitored by a separate sensor.

6.5 SIPLACE High-Force Head

Item no. 00119878-xx High-Force Head for D3

This item number only applies when a new placement machines is ordered with a High-Force

Head rather than a standard TwinHead. 6

Item no. 00119753-xx High-Force Head upgrade kit

Use this item number if you want to replace a standard TwinHead with a High-Force Head.6

6.5.1 Description

The SIPLACE High-Force Head is a development offshoot of the standard TwinHead. It can pro-

cess the same component range and also offers the possibility of achieving set-down forces up to

30 N.

Otherwise the technical data for the TwinHead and High-Force Head is the same (see Section

3.5.3.2

, page 116).

All the nozzles and grippers that are used with the standard TwinHead can be used for the SI-

PLACE High-Force Head.

Programmable set-down force 2.0 N to 10 N ± 10%

greater than 10 N up to 30 N ± 15%

User Manual SIPLACE D3 6 Station extensions

From software version SR.605.xx 07/2008 EN Edition 6.6 Component camera for the TwinHead, FC camera

315

6.6 Component camera for the TwinHead, FC camera

6.6.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)

Item no. 00119718-xx Component camera, stationary 16 x 16, digital, type 25

Fig. 6.6 - 1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)

(1) Camera housing with integral camera and camera amplifier

(2) Glass plate - over the illumination and lens levels