00195760-0102_UM_D3_SR605_EN.pdf - 第304页
6 Station extensions User Manual SIPLACE D3 6.2 Matrix tray changer From software version SR.605.xx 07/2008 EN Edition 304 6.2.3.2 Electrical ratings 6 6.2.3.3 Noise emissions 6 6.2.3.4 Permitted environment al factors 6…
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.2 Matrix tray changer
303
6.2.3 Technical data
6.2.3.1 Dimensions, weight, other data
6
Tray supply 1 (XL) Tray supply 2
Dimensions
Length x width
Height
1305 x 600 mm²
1490 mm for 830 mm PCB conveyor height
1560 mm for 900 mm PCB conveyor height
1590 mm for 930 mm PCB conveyor height
1610 mm for 950 mm PCB conveyor height
Weight (basic equipment)
Approx. 500 kg (with cassettes and waffle-pack tray
carriers)
Weight (fully equipped) Approx. 534 kg (with components)
Weight (moving mass) Approx. 80 kg Approx. 43.5 kg
Cassette size (L x W x H) 391.2 x 305.6 x 93.3 mm³ 352.7 x 154.8 x 133.8 mm³
Cassette weight
(fully equipped)
(without waffle-pack tray carrier)
Approx. 11 kg
Approx. 1.7 kg
Approx. 7.5 kg
Approx. 1.35 kg
Weight of the
waffle-pack tray carrier
850 g 150 g
Dimensions of the
waffle-pack tray carrier (L x W x H) 386.5 x 295.8 x 11.1 mm³ 371 x 146 x 10.1 mm³
Spacing from one cassette to next 96 mm 135 mm
Distance from level to level 12 mm 11.8 mm
Vertical travel 444 mm (1st to 30th WTC
a
) 511.2 mm (1st to 40th WTC
a
)
Horizontal travel between outgoing
and pick-up position Approx. 647 mm Approx. 638 mm
Storage capacity 30 XL waffle-pack tray carri-
ers with 60 JEDEC or
30 special magazines
of maximum size
40 waffle-pack tray carriers
with 40 JEDEC
waffle-pack trays
Changeover time (over 5 levels) Approx. 2 s Approx. 1.5 s
Max. height of component and waf-
fle-pack tray, including tolerances
All levels filled
One level free
Two levels free
8.5 mm
19.5 mm
31.5 mm
8.5 mm
19.5 mm
-
a) Waffle-pack tray carrier
6 Station extensions User Manual SIPLACE D3
6.2 Matrix tray changer From software version SR.605.xx 07/2008 EN Edition
304
6.2.3.2 Electrical ratings
6
6.2.3.3 Noise emissions
6
6.2.3.4 Permitted environmental factors
6
6.2.4 Installation notes for the MTC
An MTC may be docked at locations 2 and 4 on the D3 machine in place of a component trolley.
To do this, the docking unit installed for the component trolley must be replaced with the docking
unit for the MTC. If you use the MTC at another location, the location that becomes free may be
set up with a component trolley once more.
PLEASE NOTE 6
The standard nozzle changer for the TwinHead cannot be used with a combination of TwinHead
and MTC in placement areas with two gantries. For this situation, there is a nozzle changer in the
placement area with two gantries (see Section 6.1.3.5, page 300).
Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)
3 x 208 VAC ± 5%; 50/60 Hz (U.S.A. version)
3 x 400 VAC ± 5%; 50/60 Hz (European version)
Total power 1.5 kW
Rated current
2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuse 3 x 16 A
Rated power consumption of the
largest consumer
2 A
Max. noise emissions 74 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity
30 - 75%
(No higher than 45% on average to prevent any pos-
sibility of condensation on the machine)
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.2 Matrix tray changer
305
6.2.4.1 Dimensions
6
Fig. 6.2 - 1 Matrix tray changer, dimensions, all dimensions in millimeters