00195760-0102_UM_D3_SR605_EN.pdf - 第99页
User Manual SIPLACE D3 3 Technical data for the machine From software version SR.605.xx 07/2008 EN Edition 3.2 Ratings 99 3.2 Ratings 3.2.1 Electrical ratings 3 3.2.2 Pneumatic ratings an d compressed air supply 3.2.2.1 …
3 Technical data for the machine User Manual SIPLACE D3
3.1 Performance data From software version SR.605.xx 07/2008 EN Edition
98
3
3
3
Placement accu-
racy
C&P12 ± 45 μm (3σ), ± 60 μm (4σ) CO camera, type 28 (18 x 18)
C&P12 ± 41 μm (3σ), ± 55 μm (4σ) CO camera, type 29 (27 x 27)
C&P6 ± 45 μm (3σ), ± 60 μm (4σ) CO camera, type 29 (27 x 27)
TH ± 26 μm (3σ), ± 35 μm (4σ) CO camera, type 33 (55 x 45)
TH ± 22 μm (3σ), ± 30 μm (4σ) CO camera, type 25 (16 x 16)
Angular accuracy C&P12 ± 0.5° (3 σ), ± 0.7° (4 σ) CO camera, type 28 (18 x 18)
C&P12 ± 0.5° (3 σ), ± 0.7° (4 σ) CO camera, type 29 (27 x 27)
C&P6 ± 0.2° (3 σ), ± 0.3° (4 σ) CO camera, type 29 (27 x 27)
TH ± 0.05° (3 σ), ± 0.07° (4 σ) CO camera, type 33 (55 x 45)
TH ± 0.05° (3 σ), ± 0.07° (4 σ) CO camera, type 25 (16 x 16)
Component feed-
ing
4 component trolleys with tape reel holder and integral waste tape container
15 x 30 mm wide locations per component trolley or
MTC in place of component trolleys at locations 2 and 4 or
WPC at location 2
Feeder module
types
Tapes, bulk cases, stick magazines, application-specific OEM feeder modules,
surftape feeder modules (8, 12, 16 mm), waffle-pack trays
Feeding capacity 180 tracks Width: 8 mm 60 S feeder modules, 3 x 8 mm
120 tracks Width: 8 mm 60 S feeder modules, 2 x 8 mm
60 tracks Width: 12 or 16 mm 60 S feeder modules, 12/16 mm
40 tracks Width: 24 or 32 mm 40 S feeder modules, 24/32 mm
28 tracks Width: 44 mm 28 S feeder modules, 44 mm
24 tracks Width: 56 mm 24 S feeder modules, 56 mm
20 tracks Width: 72 mm 20 S feeder modules, 72 mm
16 tracks Width: 88 mm 16 S feeder modules, 88 mm
PCB formats
b
(LxW)
Single conveyor
50 x 50 mm² to 450 x 460 mm²
50 x 80 mm² to 610 x 460 mm² (Long board option)
Width up to 508 mm with Wide board configuration
Flexible dual conveyor
50 x 50 mm² to 450 x 216 mm²
50 x 80 mm² to 610 x 216 mm² (Long board option)
Width up to 250 mm with Wide board configuration
Flexible dual conveyor in Single conveyor mode
50 x 50 mm² to 450 x 380 mm²
50 x 80 mm² to 610 x 380 mm² (Long board option)
Width up to 508 mm with Wide board configuration
PCB thickness 0.3 to 4.5 mm (thicker PCBs available on request)
a) The specified component height may be reduced on the TwinHead in the placement area with two gantries
and a combination of Collect&Place head and TwinHead.
b) With PCB widths > 460 mm make sure that the peripheral modules are also able to process these widths.
User Manual SIPLACE D3 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.2 Ratings
99
3.2 Ratings
3.2.1 Electrical ratings
3
3.2.2 Pneumatic ratings and compressed air supply
3.2.2.1 Pneumatic ratings
3
Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)
a
3 x 208 VAC ± 5 %; 50/60 Hz (U.S.A. version)
a
3 x 230 VAC ± 5 %; 50/60 Hz
3 x 380 VAC ± 5 %; 50/60 Hz
3 x 400 VAC ± 5 %; 50/60 Hz (European version)
3 x 415 VAC ± 5 %; 50/60 Hz
a) Connection at terminals 3 x 204 VAC on transformer T1
Fuse 3 x 32 A (3 x 200 VAC)
3 x 32 A (3 x 208 VAC)
3 x 32 A (3 x 230 VAC)
3 x 16 A (3 x 380 VAC)
3 x 16 A (3 x 400 VAC)
3 x 16 A (3 x 415 VAC)
Nominal apparent power 4.1 kVA
Rated current consumption 9.7 A / 3 x 400 VAC
Compressed air connection values
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Compressed air connection 3/4" thread with 1/2" hose connection
Compressed air consumption
a
with 4 tape cutters
and in relation to the placement head configuration
a) Under normal atmospheric conditions at 20°C and 1013 hPa
2 x C&P12/TH or 2 x C&P6/TH 550 Nl/min
PLEASE NOTE: The vacuum pump can greatly re-
duce the compressed air consumption of the place-
ment heads (see Section 6.18
, page 340)
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
Atmospheric humidity 30 to 75%
(but no higher than 45% on average in order to
prevent any possibility of condensation on the ma-
chine).
3 Technical data for the machine User Manual SIPLACE D3
3.2 Ratings From software version SR.605.xx 07/2008 EN Edition
100
3.2.2.2 Compressed air specification
3.2.3 Ambient conditions
3
3
3
3.2.4 Ambient conditions for the packaging, transportation and storage
3
Maximum particle size by density, based on ISO/DIS 8573-1 (class 1)
Particle size 0.1 μm
Particle density 0.1 mg/m³
Maximum oil content (class 1) Particle density 0.01 mg/m³
Pressure dewpoint (class 4) Dewpoint +3°C
Temperature range Between 15°C and 35°C
Relative atmospheric humidity Between 30% and 90% at 20°C
Ambient pressure > 750 mbar (corresponds to 2,500 m above mean sea level)
Temperature range Between -25°C and 55°C
Relative atmospheric humidity Up to 95%
Ambient pressure Up to 3000 m height without pressure equalization