00195760-0102_UM_D3_SR605_EN.pdf - 第21页
User Manual SIPLACE D3 1 Introduction From software version SR.605.xx 07/2008 EN Edition 1.1 Description of the machine 21 1.1.6 EU Declaratio n of Conformity The product/device descr ibed below 1 Product: Placement mach…
1 Introduction User Manual SIPLACE D3
1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition
20
1.1.5 Serial number of the machine
The serial number of the machine can be found in two different places.
– The serial number, without leading zeros, e.g. B-1, is struck on the left-hand side of the ma-
chine frame, on the same side as the pneumatic unit (see item 1 in Fig. 1.1 - 3
).
– With leading zeros, e.g. B-001, the serial number is punched in the rating plate (see item 2 in
Fig. 1.1 - 3
).
1
Fig. 1.1 - 3 Places with the serial number on the machine
User Manual SIPLACE D3 1 Introduction
From software version SR.605.xx 07/2008 EN Edition 1.1 Description of the machine
21
1.1.6 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE D3
Item no.: 00119870 1
manufactured by
SIPLACE
Electronics Assembly Systems
Rupert-Mayer-Str. 44
81379 München 1
conforms to the regulations and standards listed in the EU Declaration of Conformity provided.
1.1.7 Use as prescribed
The product must only be used for its intended purposes as described in the catalogs and techni-
cal descriptions, namely the placement of SMD components, and only with the third-party equip-
ment and components recommended or permitted by SIPLACE. Use for a different or
extended purpose is not prescribed.
If the product is not used as prescribed, SIPLACE accepts no liability for any damage that may
occur and does not guarantee that the components will work properly and without problems.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
1.1.8 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, used other than as prescribed is expressly prohibited. If the product is
not used as prescribed, SIPLACE Company accepts no liability for any damage that may occur
and does not guarantee that the components will work properly and without problems.
Use of the machine other than as prescribed includes, for example
– operation of the placement machine with safety equipment deactivated or removed.
– placement of components that do not meet the permitted specification.
– use of component feeder modules that have not been approved.
– use of unauthorized accessories and additional modules.
– use of the placement machine by unqualified personnel.
1 Introduction User Manual SIPLACE D3
1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition
22
– operation of the placement machine without the hand guard (dummy feeder module) if not
every location is occupied with a feeder module.
– unclear allocation of electrical connecting cables to each machine and the installed options.
– if there are two or more people standing at a component trolley location at the same time dur-
ing the retrofit.
1
1.1.9 Noise emissions
1
1.1.10 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way.
PLEASE NOTE 1
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
→ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
1.1.11 Electromagnetic compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.1.12 Note on original SIPLACE accessories
→ Only use SIPLACE original spare parts and authorized accessories. The use of other parts
will affect safety and will invalidate the liability for any consequential damage.
Max. noise emissions 75 dB (A)