MEC-CP842-1.0E.pdf - 第102页

Maintena nce >> Lubrication 5-42 MEC-CP842-1.0E Note: 1. Carefully arrange the plastic sheet to catch oi l when draining the oil cool er . 2. The oil removed from the machine shoul d be discarded in accordance with…

100%1 / 232
Maintenance >> Lubrication
MEC-CP842-1.0E 5-41
6 Cover the cameras, prism box, and surrounding areas with a plastic sheet.
Note: Cover the machine carefully when draining the oil cooler.
7 Remove the oil from the nozzle index unit drain plug.
Cover the corrugated cardboard with a plastic sheet, create a slope and drain
the contents of the nozzle index unit into a collecting bucket.
Note: The oil removed from the machine should be discarded in accordance with local ordinances
from handling waste matter.
8 Replace and properly tighten the drain plug after the oil has been drained.
9 Open the front doors.
10 Remove the oil from the theta (Q) index unit drain plug.
Use a plastic sheet as shown in the diagram below, remove the drain plug and
drain the old oil into the collecting container.
C746M3033
Plastic sheet
C746M3034
Slope
Drain plug
Maintenance >> Lubrication
5-42 MEC-CP842-1.0E
Note:
1. Carefully arrange the plastic sheet to catch oil when draining the oil cooler.
2. The oil removed from the machine should be discarded in accordance with local ordinances
from handling waste matter.
11 Replace and properly tighten the drain plug after the oil has been drained.
C746M3035
Plastic sheet
Drain plug
Maintenance >> Lubrication
MEC-CP842-1.0E 5-43
12 Slowly pour the new oil into the inlet on the top of the oil cooler.
13 Ensure that the oil volume is in the range specified by the level indicator.
Note: However, does not normally change. Immediately after replacement, the oil level will drop
when the machine is run. Run the machine for a short time, and then add more oil until the
level is within the recommended range. The oil level indicator should remain at the same
position with the machine off as it is when running.
C746M3036
(51)
<CP-842E> <CP-842ME>
Oil range
Oil cooler
Gauge glass
Level indicator
Cap
Oil inlet