MEC-CP842-1.0E.pdf - 第88页
Maintena nce >> Lubrication 5-28 MEC-CP842-1.0E C746M3040 Connect the hose to the special grease nozzle and inject grease into the NZ-axis LM block. NZ-axis LM block Special grease nozzle Hose ADGPJ818* Special gre…
Maintenance >> Lubrication
MEC-CP842-1.0E 5-27
5.2.8 Lubricating the Cam Box
Arrows in the illustration indicate lubrication points. Black arrows indicate that a
grease gun is required.
C746M3T07
16
17
18
19
20
21
22
23
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Daphne Exponex No. 2
Lubrication points
Schedule
Types of lubricant
Monthly
Cam
Monthly
Cam lever pivot (7 points)
Monthly
Cam lever bearing
Monthly
NZ-axis ball screw
Every 3 months
NZ-axis LM rail
Every 3 months
Every 3 months
NZ-axis holder
NZ-axis LM block
Monthly
-axis connecting pin
AFC grease
AFC grease
C746M3021
(16)
(16)
(20)
(19)
(21)
(16)
(16)
(16)
(16)
(23)
(18)
(17)
(17)
(18)
(22)
Lubrication of (22) requires a special grease
nozzle. Refer to the next page for details.
Do not lubricate the shaft on the air
cylinder.
Shaft
ST2, 8, 9, 10 rod
Maintenance >> Lubrication
5-28 MEC-CP842-1.0E
C746M3040
Connect the hose to the special grease nozzle and
inject grease into the NZ-axis LM block.
NZ-axis LM block
Special grease nozzle
Hose
ADGPJ818*
Special grease nozzle
for the NZ-axis LM block
Maintenance >> Lubrication
MEC-CP842-1.0E 5-29
5.2.9 Lubricating the Waste Tape Disposal Unit
Arrows in the illustration indicate lubrication points.
C746M3T08
24
25
26
Daphne Exponex No. 2
Daphne Exponex No. 2
Lubrication points
Schedule
Types of lubricant
Weekly
Monthly
Weekly
Movable cutter
Cam follower
AFC grease
Thrust bearing
C746M3022
(26)
(26)
ST1
(24)
(25)
(24)
(24)
(26)
(24)
Note: Apply AFC grease to the outside surface
of the thrust bearing.
Disassembly is not required.