MEC-CP842-1.0E.pdf - 第90页
Maintena nce >> Lubrication 5-30 MEC-CP842-1.0E 5.2.10 Lubricating the NY -A xis Pickup Offset Mecha- nism Arrows in the illustration indica te lubric ation points. Black arrows indicate that a grease gun is requir…
Maintenance >> Lubrication
MEC-CP842-1.0E 5-29
5.2.9 Lubricating the Waste Tape Disposal Unit
Arrows in the illustration indicate lubrication points.
C746M3T08
24
25
26
Daphne Exponex No. 2
Daphne Exponex No. 2
Lubrication points
Schedule
Types of lubricant
Weekly
Monthly
Weekly
Movable cutter
Cam follower
AFC grease
Thrust bearing
C746M3022
(26)
(26)
ST1
(24)
(25)
(24)
(24)
(26)
(24)
Note: Apply AFC grease to the outside surface
of the thrust bearing.
Disassembly is not required.
Maintenance >> Lubrication
5-30 MEC-CP842-1.0E
5.2.10 Lubricating the NY-Axis Pickup Offset Mecha-
nism
Arrows in the illustration indicate lubrication points. Black arrows indicate that a
grease gun is required.
AFC grease
Multemp LRL3
C746M3T21
Lubrication points
Schedule
Types of lubricant
27
28
Monthly
Monthly
LM block
Roller
C746M3041
(28)
(27)
ST1
Special grease nozzle
Special
grease nozzle
Hose
DGPJ055*
(27)
Connect the special grease nozzle (DGPJ055*)
to the grease gun hose and insert into the grease
port on the LM block.
Maintenance >> Lubrication
MEC-CP842-1.0E 5-31
5.2.11 Lubricating the Rod Ends
Arrows in the illustration indicate lubrication points. Black arrows indicate that a
grease gun is required.
C746M3T09
29
Lubrication points
Schedule
Types of lubricant
Every 3 months
Rod end
Daphne Exponex No. 2
C746M3023
(29)
ST14
Rod end
(has a grease fitting)
Inside of the cam box