MEC-CP842-1.0E.pdf - 第227页
Supplementary Informa tion >> Noise Levels MEC-CP842-1.0E 10-1 10. Supplement ary Information 10.1 Noise Levels The following table shows the measured no ise levels for CP-842E during operatio n. Note: The noise le…
Setup >> Moving the Machine
9-10 MEC-CP842-1.0E
3 Insert the forklift so that its left and right forks are the same distance from the
machine center. Moreover, the space between the left and right forks should be
set as wide as possible.
Note: The forklift should be operated in accordance with the manual provided by the forklift manu-
facturer.
4 Using the forklift, lift the machine to a height of 30 cm.
5 Transport the machine by forklift to its new location, then lower the machine
slowly onto the leveling sheets or leveling blocks. For details concerning level-
ing sheet or leveling block configurations, refer to 9.1 "Leveling The Machine".
DANGER
Do not attempt any tasks beneath the lifted machine.
C746M600
9
D-axis bracket
<CP-842ME>
<CP-842E>
C746M6010
Supplementary Information >> Noise Levels
MEC-CP842-1.0E 10-1
10. Supplementary Information
10.1 Noise Levels
The following table shows the measured noise levels for CP-842E during operation.
Note: The noise level of the CP-842ME is lower than that of the CP-842E.
WARNING
Operators should wear ear plugs in operating environments where
noise levels are high enough (80 dBA or more) to cause hearing
damage.
C746MX001
Machine Model
Max. Noise Level (dBA) RemarksMeasurement points (m)
CP-842E
Front side
Rear side 1 ......................76
Front side 2 ......................74
Background
noise
63 dB
Height from floor: 1.2
Distance from machine sides: 1.0
1
2
Supplementary Information >> Noise Levels
10-2 MEC-CP842-1.0E
MEMO: