MEC-CP842-1.0E.pdf - 第33页

The Machine >> Sensor Positions MEC-CP842-1.0E 3-11 3.3 Sensor Positions 3.3.1 XY -t able X/Y -axis SX009 SX011 SX012 SX00A C746M1009 C746M1T01 SX009 SX00A SX011 SX012 X_AXIS_+OT X_AXIS_-OT Y_AXIS_+OT Y_AXIS_-OT Se…

100%1 / 232
The Machine >> Functions of Each Part
3-10 MEC-CP842-1.0E
Operation panel
The operation panel comprises switches and a touch screen monitor which are used to
operate the machine.
Control box
The control box contains electrical circuit boards used to control the machine. It is
also equipped with a CD ROM drive which is required to install software.
Servo box (Servo BKT)
The servo box contains the servo BKT to which the servo amplifiers and boards are
attached. Users should not interfere with this box, except to perform servo amplifier
replacement.
UPS (Uninterrupted Power Supply Unit)
The UPS unit is positioned in the transformer box at the rear of the machine. Under
normal circumstances, the power supply from the UPS is cut automatically when the
machine is shut down. However, if the machine is not operating correctly, the power
from the UPS unit may not always be cut. As a safety precaution when performing
any kind of electrical maintenance work, always switch the UPS unit off after turning
off the main power switch.
C84PCA005E
UPS (Uninterrupted Power Supply Unit)
2QYGT5YKVEJ
The Machine >> Sensor Positions
MEC-CP842-1.0E 3-11
3.3 Sensor Positions
3.3.1 XY-table
X/Y-axis
SX009
SX011
SX012
SX00A
C746M1009
C746M1T01
SX009
SX00A
SX011
SX012
X_AXIS_+OT
X_AXIS_-OT
Y_AXIS_+OT
Y_AXIS_-OT
Sensor No.
SIGNAL NAME
The Machine >> Sensor Positions
3-12 MEC-CP842-1.0E
Z-axis
SX01A
X05E
SX019
X05C
C746M1010
C746M1T02
SX019
SX01A
X05C
X05E
Z_AXIS_+OT
Z_AXIS_-OT
XY-TABLE LOADING HEIGHT CHECK
MAIN-LIFTER MIDDLE OT
Sensor No.
SIGNAL NAME