MEC-CP842-1.0E.pdf - 第96页
Maintena nce >> Lubrication 5-36 MEC-CP842-1.0E 5.2.16 Lubricating the Pallet T able Arrows in the illustration indica te lubrication points. C746M3T14 AFC grease Every 3 months Every 3 months Monthly AFC grease Da…
Maintenance >> Lubrication
MEC-CP842-1.0E 5-35
5.2.15 Lubricating the Parts Reject Unit
Arrows in the illustration indicate lubrication points. Black arrows indicate that a
grease gun is required.
C746M3T13
AFC grease
AFC grease
Lubrication points
Schedule
Types of lubricant
40
Every 3 months
41
Cam follower
Every 3 months
LM rail
Monthly
AFC grease
39
Valve push pin
C746M3038
(40)
(40)
(39)
Connect the hose to the special
grease nozzle (DGPJ055*), and
then insert the nozzle tip into the
LM guide grease port.
Special grease
nozzle
Hose
(41)
Valve push pin overview
Do not apply grease
on the air blow hole.
Apply grease
Maintenance >> Lubrication
5-36 MEC-CP842-1.0E
5.2.16 Lubricating the Pallet Table
Arrows in the illustration indicate lubrication points.
C746M3T14
AFC grease
Every 3 months
Every 3 months
Monthly
AFC grease
Daphne Eponex No.2
Pallet clamp surface
Clamp pin
Cam follower
Lubrication points
Schedule
Types of lubricant
42
43
44
C746M3027
(42)
(42)
(42)
(44)
(42)
(42)
(42)
(42)
(43)
(43)
(43)
(43)
<CP-842ME> Option
(44)
(44)
(44)
(44)
Maintenance >> Lubrication
MEC-CP842-1.0E 5-37
5.2.17 Lubricating the Nozzle Changer
Arrows in the illustration indicate lubrication points.
C746M3T15
AFC grease
AFC grease
Monthly
Monthly
Daphne Exponex No. 2
Lubrication points
Schedule
Types of lubricant
45
Spline shaft
Beveled gear
Every 3 months
Monthly
Monthly
Daphne Exponex No. 2
Daphne Exponex No. 2
46
47
48
49
Moveable sections on the lever
Clutch engagement surface
Thrust bearing
C746M3028
ST14
(45)
(49)
(48)
(45)
(46)
(47)
(49)
(49)
Apply grease then wipe
clean to leave just a
thin layer.
Note: Apply AFC grease to the outside surface of the
thrust bearing and rotate it to work the grease
into the bearing.
Disassembly is not required.