00198168-02_Technical_Training_TX-Series_EN.pdf - 第183页
7 Conveyor System 7.5 Parts Exchange / Settings / Calibration Technical Training SIPLACE TX-Series 10/2016 183 7.5.2.4 Board reference corner 1. Log on as Machine service (1-3). 2. Click Calibration (1). Click Automatic …
7 Conveyor System
7.5 Parts Exchange / Settings / Calibration
182 Technical Training SIPLACE TX-Series 10/2016
5b. Alternatively enter board width value (Key
in the current PCB width).
6. Click Save machine data for conveyor.
7 Conveyor System
7.5 Parts Exchange / Settings / Calibration
Technical Training SIPLACE TX-Series 10/2016 183
7.5.2.4 Board reference corner
1. Log on as Machine service (1-3). 2. Click Calibration (1).
Click Automatic calibration (2).
3. Select Board reference corner (1).
Click Next (2).
4. Select Conveyor (1).
Click Start (2).
5. Click Accept to save data and close.
7 Conveyor System
7.5 Parts Exchange / Settings / Calibration
184 Technical Training SIPLACE TX-Series 10/2016
7.5.2.5 Teaching the sensor
1. Log on as Machine service (1-3). 2. Click on Check sensors icon (1).
Select Specific functions (2).
3. Click Conveyor Input/output. 4. Click on Sensor.
5. Click on red box Teach board sensor. 6. Click Select enable.
Click OK.