00198168-02_Technical_Training_TX-Series_EN.pdf - 第248页
10 Station Software Overviews 10.7 Maintenance GUI 248 Technical Training SIPLACE TX-Series 10/2016 Verification – Conveyor Rail Verification This function check the parallelism of the conveyor rails with the PCB cameras…
10 Station Software Overviews
10.7 Maintenance GUI
Technical Training SIPLACE TX-Series 10/2016 247
C&P20 P Scripts
Preconditions:
Nozzle 4069 and 4235 Calibration Part
ZDS sensor values
Air & vacuum with head sensors
Nozzle spring
Holding circuit (sealed nozzles)
Z-Axis movement
CPP Scripts
Preconditions:
Nozzle 2069 and 2057 Calibration Part
BE-sensor voltage and z-heights
Dp-/Z-positioning
Holding circuit (sealed nozzles)
Nozzle spring
Z-Axis movement
Air & vacuum with head sensors
TH Scripts
Preconditions:
Nozzle Calibration Part
Positioning time DP
Travel distance z
Positioning time z
Air vacuum
Endurance run 2N
Verification – Camera Verification
Camera verification is the FCCS tool this
verifies and adjusts the cameras, it also issues
reports.
Line functionality, if no cameras is selected the
machine will send the FCCS tool through the
line to the machine with a camera selected.
Verification – Camera Connections
This function checks the connection and com-
munication between the vision computer, vision
based interface, vision head interface and the
connected cameras. (PCB cameras, component
cameras and stationary cameras).
10 Station Software Overviews
10.7 Maintenance GUI
248 Technical Training SIPLACE TX-Series 10/2016
Verification – Conveyor Rail Verification
This function check the parallelism of the
conveyor rails with the PCB cameras and the
outer edge of each rail in the placement area.
Verification – Conveyor Motor Verification
This function to verify the transport motors
depending on the current and the defined limits.
Example/ Extract of the report.
Verification – Power Supply (SMPS)
This is the common function for the power sup-
ply (SMPS) and is available for X-Series S and
SX machine with X-module upgrade and all TX
machine.
10 Station Software Overviews
10.7 Maintenance GUI
Technical Training SIPLACE TX-Series 10/2016 249
Verification – Feeder Verification
This function is to verify the feeder pick up
position at the machine.
The machine takes a picture of the real pickup
position without offsets, so that the user can see
if the drive system matches the pickup position.