00198168-02_Technical_Training_TX-Series_EN.pdf - 第2页
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violat…
Technical Training
SIPLACE TX-Series
Edition 10/2016 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM
Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198168-02
www.asm-smt.com Printed by ASM Assembly Systems
3Technical Training SIPLACE TX-Series 10/2016
Table of Contents
Table of Contents
1 Machine Safety.. 9
1.1 Machine Safety.. 9
1.2 Warning Labels - General.. 10
1.3 High temperatures related to C&P20 A/M/P/M2 Head, X-Feeder 8mm and Smart-
Feeder 4mmX / 8mmX.. 11
1.4 High temperature related to MHCU.. 11
1.5 ESD Guidelines.. 12
1.6 Excercise: Machine Safety.. 12
2 Machine Basic Overview.. 15
2.1 Introduction.. 15
2.2 Machine Overview.. 17
2.3 Overview main components.. 18
2.4 Machine Configuration.. 21
2.5 Special Features.. 24
2.6 Excercise: TX Machine Basic Overview.. 25
3 Setting Up the Machine.. 29
3.1 Setting up the TX Machine.. 29
3.2 Setting up the TX Machine - Calibrations.. 32
3.3 Setting up the TX Machine – Tools.. 33
3.4 Excercise: Setting up the machine.. 33
4 Gantry System.. 37
4.1 Overview.. 37
4.2 Reference Run.. 39
4.3 Calibration after Repair and Adjustment.. 41
4.3.1 Explanation of main Gantry Calibrations.. 41
4.3.2 Conducting Calibrations.. 42
4.4 PCBs.. 43
4.5 Control and Communication Overview.. 45
4.5.1 Gantry System - Travel Ranges and Speed Monitoring.. 46
4.6 Analyze.. 47
4.7 Main Parts Exchange / Setting / Calibration.. 47
4.8 Gantry System and Base Machine - Overview Maintenance.. 48
4.9 Excercise: TX Gantry System.. 48
5 Placement Heads.. 51
5.1 CPP Head.. 51
5.1.1 Overview.. 51
5.1.1.1 Overview.. 51
5.1.1.2 Technical Data.. 52
5.1.2 Main Parts/Unit Overview.. 53
5.1.2.1 Star.. 53
5.1.2.2 DP Drive.. 54