00198168-02_Technical_Training_TX-Series_EN.pdf - 第88页

5 Placement Heads 5.1 CPP Head 88 Technical Training SIPLACE TX-Series 10/2016 Room for Your Sketches and Notes

5 Placement Heads

5.1 CPP Head

Technical Training SIPLACE TX-Series 10/2016 87

5.1.10 Excercise: CPP Head

1. Which of the following is false regarding CPP Head?

A Three placement modes possible: Collect & Place, Pick & Place and Mixed mode.

B With top placement performance the CPP_H: max. components height is 11.5mm and the

CPP_L: max. height components is 6 mm.

C The bottom light sensor is integrated into each DP driver for CPP.

D Holding circuit vacuum is always activated during placement.

2. Which description is correct regarding the CPP Head vacuum system?

A Vacuum pump is a standard component for holding circuit of CPP.

B Pressure Regulator Valve (PRV) supplies the pickup/placement and holding circuit with

vacuum/air kiss during the pickup/placement process.

C The holding circuit vacuum can be switch on/off by the valve block.

D All vacuum values can be measure by PRV.

3. One Base Adapter C&P board is used for CPP, and another Base Adapter with same

part no. is used for C&P20 P, nothing is required to be done if we exchange them.

True …………………………………………………………………………………………………

False …………………………………………………………………………………………………

4. What is the function of component sensor?

………………………………………………………………………………………………………

5 Placement Heads

5.1 CPP Head

88 Technical Training SIPLACE TX-Series 10/2016

Room for Your Sketches and Notes

5 Placement Heads

5.1 CPP Head

Technical Training SIPLACE TX-Series 10/2016 89