00198168-02_Technical_Training_TX-Series_EN.pdf - 第8页
8 Technical Training SIPLACE TX-Series 10/2016 Table of Contents 11.3.1 Overview .. 257 11.3.2 Button Description .. 258 11.3.3 LED indication .. 258 11.4 JTF (JEDEC Tray Feeder) - Power and Communication .. 259 …
7Technical Training SIPLACE TX-Series 10/2016
Table of Contents
8.5.1 Main switch.. 204
8.5.2 Power Pack PS1-(330 VDC/ 160 VDC).. 204
8.5.2.1 Power Supply(SMPS) – Safety Indication.. 205
8.5.3 CAP1 - Capacitor Battery (Backup Capacitor).. 206
8.5.4 Power Pack PS2-PS3 and PS4.. 206
8.5.5 Power Supply (SMPS) - Measuring & Testing 300VDC.. 207
8.6 SMPS diagnostic.. 208
8.7 Safety control.. 209
8.8 Analysis - Common Error List.. 210
8.9 US option.. 213
8.10 Pneumatic System Overview.. 213
8.11 Excercise: Power Supply.. 215
9 Control and Communication.. 219
9.1 Communication Complete Overview.. 219
9.2 Machine Communication bus Overview.. 220
9.3 MGCU and MHCU.. 222
9.4 Box PC (Control Computer).. 223
9.5 CIN Box.. 224
9.6 Network Construction.. 225
9.7 Axis Control.. 225
9.8 FCU.. 226
9.9 Feeder Communication.. 227
9.10 VISION GigE.. 228
9.11 Analysis - Common Error List.. 230
9.12 Excercise: Control and Communication.. 231
10 Station Software Overviews.. 235
10.1 Station Software Start Page Overview.. 235
10.2 Overview Station Software Main Menus.. 236
10.3 User management and activity level rights.. 237
10.4 Editing a board with the station software.. 239
10.5 Machine Settings and Options Overview.. 240
10.6 Machine Software Options Overview.. 241
10.7 Maintenance GUI.. 242
10.7.1 General Maintenance GUI.. 242
10.7.2 Preventive Maintenance.. 242
10.7.3 Predictive Maintenance.. 245
10.7.4 Verification.. 245
10.7.4.1 Power Supply Diagnostics GUI.. 250
10.8 Embedded software (eSW) download.. 251
10.9 Station GUI Shuttle Extension.. 252
10.10 Excercise: Station Software Overviews.. 252
11 JTF-ML.. 255
11.1 JTF (JEDEC Tray Feeder) - General Overview.. 255
11.2 JTF (JEDEC Tray Feeder) - Technical Data.. 256
11.3 JTF (JEDEC Tray Feeder) - Operation .. 257
8 Technical Training SIPLACE TX-Series 10/2016
Table of Contents
11.3.1 Overview.. 257
11.3.2 Button Description.. 258
11.3.3 LED indication.. 258
11.4 JTF (JEDEC Tray Feeder) - Power and Communication.. 259
11.5 JTF (JEDEC Tray Feeder) - Adjustment.. 260
11.6 Analysis - Common Error List.. 261
11.6.1 General.. 261
11.7 Maintenance.. 262
11.8 Excercise: JTF-ML.. 262
1 Machine Safety
1.1 Machine Safety
Technical Training SIPLACE TX-Series 10/2016 9
1 Machine Safety
1.1 Machine Safety
CAUTION
Any persons working on the machine must be familiar with the safety instructions in the
user manual and observe this at all times. The following safety instructions are only an
excerpt from the chapter "Operational Safety" in the SIPLACE user manual. For further
detailed safety information please refer to the User Manual that was supplied with your
machine. Please pay attention to the safety instructions as delivered by our instructor.
TX buttons and switches
1. Emergency stop button
2. Stop and start buttons
3. Button for docking and undocking the
component trolley at the respective
locations
NOTICE
DO NOT use the emergency stop button to stop the machine unless in emergency
situation! Use only the stop button (black) for general machine stop!
Permanent magnets symbol
●
Risk of death for persons with active
implants (e.g. pacemakers, insulin
pumps, defibrillators).
●
Danger of crushing for persons with
passive metal implants (e.g. plates,
screws).
●
Do not reach into the machine or bend
towards it when the protective covers
are open.
●
Do not bring any metal objects into the
area.