00197195-02-UG SetupCenter 5.1_en.pdf - 第106页

Working with the Setup Center Application Packaging Unit Editor Packaging Unit Information - Tabs 106 User Guide SIPLACE Setup Center 5.1 7.1.1.3 Tab - Manufacturer The following info rmation is shown abo ut t he packagi…

100%1 / 196
Working with the Setup Center Application
Packaging Unit Information - Tabs Packaging Unit Editor
User Guide SIPLACE Setup Center 5.1 105
7.1.1 Packaging Unit Information - Tabs
7.1.1.1 Tab - Quantity
The quantity can be corrected in the Quantity tab.
Changing the Quantity
Steps:
► Open the Packaging Unit Editor. The configured packaging unit chain will be shown in the dialog win-
dow.
► Select the packaging unit to be edited from the packaging unit chain.
► Select the Quantity (1) tab.
Original quantity: Original quantity of a packaging unit.
Current Quantity: Shows the current remaining quantity of a packaging unit. The quantity can be
changed here.
► Enter the new quantity (2).
► Click on Save (3) to confirm the new quantity.
If the packaging unit is part of a setup which is active at the line, the new quantity will be sent to the sta-
tion.
7.1.1.2 Tab - Packaging Unit
The following information is shown for this packaging unit.
Parameter Description
Original quantity Original quantity of a packaging unit.
Current quantity Current remaining quantity of a packaging unit. The quantity can be changed
here.
Gray zone If the system cannot detect whether a specific packaging unit is in use or wheth-
er the next packaging unit is now being used (batch change), all possible pack-
aging units will be recorded in the Traceability data. This is called a “gray zone”.
If we increase the effort for collecting information (e.g. splice detection) the gray
zone gets smaller.
Setup quantity The quantity with which the packaging unit was set up on the machine.
Parameter Description
Component Name The component name from SIPLACE Pro is entered here after
completion of a successful setup verification.
Component Barcode The fully scanned barcode, used to to determine that the pack-
aging unit setup verification was successful.
Component barcode fragment The part of the scanned barcode used to to determine that the
packaging unit setup verification was successful.
Working with the Setup Center Application
Packaging Unit Editor Packaging Unit Information - Tabs
106 User Guide SIPLACE Setup Center 5.1
7.1.1.3 Tab - Manufacturer
The following information is shown about the packaging unit manufacturer.
7.1.1.4 Tab - Supplier
The following information is shown about the packaging unit supplier.
7.1.1.5 Tab - Durability
The durability data is shown for this packaging unit.
Batch 1 This information is used by the manufacturer to mark the batch
with additional information, such as quantity, production, deliv-
ery etc.
Batch 2 Information about the 2nd batch, if available.
Revision Level The revision level for the component.
Brightness Class Information about the brightness class for LED components.
Parameter Description
Parameter Description
Manufacturer The name of the manufacturer.
Manufacturer Location The address of the manufacturer.
Manufacturing Date The date on which this packaging unit was produced.
Serial number The manufacturer's serial number for this packaging unit.
Manufacturer Component Name The manufacturer's component name for this packaging unit.
Parameter Description
Supplier The name of the supplier.
Supplier Data Specific data about the supplier.
Ordering Code An additional code for ordering the packaging unit, such as the
software version for microcontrollers.
Purchase Order Number The supplier's order number for this packaging unit.
Shipping Note Number The supplier's delivery note number for this packaging unit.
Parameter Description
Expiry Date The date until which the packaging unit may be used.
Remaining time to use-by date The time which the packaging unit may still be used. After this
time, the packaging unit will be locked.
MSD Level The MSD level specifies how long moisture-sensitive compo-
nents may be used for once they have been taken out of their
protective packaging.
MSD open date The date and time when the packaging was opened.
MSD remaining time The time which the packaging unit may still be used. After this
time, the packaging unit will be locked.
RoHS Restriction of Hazardous Substances
.
“Y” means adherence to the current RoHS conditions for this
packaging unit.
"N" means non-compliance.
"0" (zero) means that RoHS is not applicable.
Working with the Setup Center Application
Packaging Unit Information - Tabs Packaging Unit Editor
User Guide SIPLACE Setup Center 5.1 107
7.1.1.6 Tab - Customer Information
This shows the customer information about this packaging unit.
7.1.1.7 Tab - Lifecycle
The lifecycle data is shown for this packaging unit.
7.1.1.8 Tab - Packaging Unit Locks
Shows information about locked packaging units in the chain.
Parameter Description
Comment Is currently only set via XML import or import from a superior
system (e.g. MES).
Additional Component Information Additional component information. Use varies between facto-
ries.
Extra1 Character string for additional information
Extra2 Character string for additional information
Extra3 Character string for additional information
Parameter Description
Last modified date Shows when the packaging unit was last updated.
Verified date The date on which this packaging unit was last verified
(scanned).
Consumed date The date on which this packaging unit was used up.
Last placed date The date on which this packaging unit was last placed.
WARNING
Removing packaging unit locks
All locks that have been assigned by Setup Center have to be "removed" by correcting the error
appropriately, e.g., scanning the correct barcode, refilling the correct track, using the splice
monitor dialogs to correct a splicing error. Select the Remove Lock button to remove the pack-
aging unit lock for a selected entry. The Remove Lock function is only necessary in rare cases.
The Remove Lock function is only available if the Password Request option was activated un-
der Tools =>Settings => Security.
Parameter Description
Action Date Shows when the packaging unit was locked.
Source Shows who locked the packaging unit.
Reason Shows the reason why the packaging unit was locked.
Message Shows an additional message about the packaging unit.