00197195-02-UG SetupCenter 5.1_en.pdf - 第31页

Configuring Setup Center Print Current Quantity Barcode Label on Tear down Barcode Labels User Guide SIPLACE Setup Center 5.1 31 3.2.6.1 Teardown with Quantity Printout If the use d packaging units are p rocessed wit hou…

100%1 / 196
Configuring Setup Center
General Packaging Data for Station-Based Traceability
30 User Guide SIPLACE Setup Center 5.1
3.2.4 Packaging Data for Station-Based Traceability
Definition of packaging unit data which can be transferred to the station after successful verification (407,
505 or 605). You can define 6 different attributes.
► Select the required parameters from the relevant list boxes.
► Click on the Default Values button to apply the default settings coordinated with the SIPLACE Trace
Service.
3.2.5 Automatic Individualization of Batch Packaging Units
3.2.6 Print Current Quantity Barcode Label on Tear down
NOTICE
Packaging ID
In order for SIPLACE Trace Service Traceability to generate data, you need to have a Packag-
ing ID in attribute 6.
Parameter Description
Automatically individualize
packaging units of a batch
Setup Center supports identical component batches for linear feed-
ers and tray feeders. This means that the same unique ID can be
scanned for several linear feeders or tray feeders.
Select the required option:
On tray feeders
For linear feeders
Traceability (station based)
Copy the unique ID of the batch packaging unit into the batch field of
the packaging unit
Activate this option and the actually scanned unique ID is saved in
the batch field. Make sure that this is not also part of the barcode def-
inition. Access to the separate packaging units of the identical com-
ponent batches is not possible after tearing down, as these use
generated unique IDs.
Parameter Description
Active Setup Center supports printing the current quantity before tearing
down. This is useful in the operating mode "Identical component
batch", because the current packaging unit quantity is lost during tear
down. Quantity correction labels offer the possibility to keep this in-
formation. The quantity correction labels can be printed individually
for each packaging unit, for feeders, for tables and for the complete
setup during tear down (via GUI or scanner).
Print always The quantity correction labels are printed automatically during tear
down.
Ask operator before printing After tear down a prompt for printing the quantity correction labels is
displayed at the barcode scanner and in the Setup GUI. If printing is
requested, the printout is started.
Selected printer Printer on which the quantity correction labels are printed. The printer
must be configured in the operating system.
Barcode label template Setup Center supports specific templates for barcode labels.
Configuring Setup Center
Print Current Quantity Barcode Label on Tear down Barcode Labels
User Guide SIPLACE Setup Center 5.1 31
3.2.6.1 Teardown with Quantity Printout
If the used packaging units are processed without unique ID barcodes, all entries for a packaging unit
are deleted from the Setup Center database after teardown. This also means that the current quantity
for a partially processed reel remains unused.
In order to prevent this, you can print out quantity barcodes during teardown.
The contents of the quantity barcode can be configured as follows in the ApplicationSettings.xml file:
<Setting key="BusinessRules.SetupVerification.QuantityPrintout.BarcodePattern" value="$CQ{Quanti-
ty}${OriginalQuantity}"/>
The following place holders are possible:
Component, Quantity, OriginalQuantity, Batch, Extra1, Extra2, Extra3, Serial, SiplaceProComponent,
Supplier, Manufacturer, ExpiryDate, ManufactureDate.
Prerequisite
▪ The "Print current quantity barcode label on tear down" was activated via
Extras → Settings
→ General
.
▪ A label printer is ready to operate and can be accessed by Setup Center.
▪ A barcode label must be configured which corresponds to the printed barcode (default quantity bar-
code: '^\$CQ(?<Quantity>\d{1,6})\$(?<OriginalQuantity>\d{1,6})$').
3.3 Barcode Labels
► In the main menu open Extras > Settings and the Settings window is opened.
► Select the category Barcode labels and the settings are opened.
In this view the barcode definitions used by Setup Center are created. Barcode labels can be defined for
use during the setup verification of Setup Center.
Overview of Barcode Labels
NOTICE
Save the settings for barcode label templates
The settings for these barcode label templates are stored in the file "BarcodelabelsPrintout-
Styles.xml" in the installation directory (as a default, this is: C:\Programs\SIPLACE\SIPLACE
Setup Center). If your settings result in illegible printouts, change the settings here and save a
copy of the file.
Legend
1. Sorted list of barcode labels
2. Barcode label - full view
3. Barcode label name
4. Barcode Fragment
5. Barcode
Configuring Setup Center
Barcode Labels Fragment Mapping
32 User Guide SIPLACE Setup Center 5.1
3.3.1 Fragment Mapping
► In the main menu open Extras > Settings and the Settings window is opened.
► Select the category Barcode labels and the settings are opened.
► Select the Fragment Mapping function and the Fragment Mapping dialog box will open.
If a barcode fragment contains values which do not match the standard, alternative values can be en-
tered with this function. An error message will be issued if the scanned barcode does not match the pre-
scribed values.
Settings Description
Label name Names of barcode labels as sorted list.
Component verification "Component“ fragment for component verification
The barcode fragment 'Component' is extracted from the fully scanned bar-
code and is then (just this fragment) compared with the supplier barcode in the
programming system. This ensures that the barcode containing the fragment
'Component' can also contain other fragments and have any length, without
the need to generate matching versions of the supplier barcode.
Component barcode for verification
The fully scanned barcode, which contains the barcode fragment 'Compo-
nent', will be compared with the supplier barcode in the programming system.
If the barcode contains other barcode fragments, you will need to enter filler
characters in the supplier barcode and the filter, to ensure that the number of
characters matches the barcode which was scanned in.
Fragment mapping The Fragment Mapping dialog box will open. See "3.3.1 Fragment Mapping"
[➙32].
If a barcode fragment contains values which do not match those prescribed,
alternative values can be entered with this function. An error message will be
issued if the scanned barcode does not match the prescribed values.
Pattern Total barcode pattern for selected barcode label.
Expert mode Activation of expert mode for manual editing of barcode pattern.
Scanned barcode During the barcode test the scanned barcode is entered here.
Tab Description
MSD Level Value: MSD level values acc. to IPC/JEDEC standard (1, 2, 2a, 3, 4, 5, 5a, 6)
Alternative values: enter the alternative value here.
RoHS adherence Value: Y = Yes, N= No, 0 = Unknown
Alternative values: enter the alternative value here.
Brightness Class Define a placeholder (filter) for those characters in the brightness class bar-
code which you do not want Setup Center to check.
Example:
Brightness class on the packaging unit: S10300S40300
Definition of brightness class
in the SIPLACE Pro setup: S1XXXXS4XXXX
If X is defined here as a placeholder, only the characters at S1 and S4 on the
barcode will be checked by Setup Center.